Printable View
Hey guys,
I've been reading up on mini me and D16 to carb swaps and while the following sounds like it would be straight foward it rarely is...
Could I swap a D16Y4 from a 98 EK1 into an Aus ED6 dual carb civic, using the stock manifolds inc carbs and ed6 dizzy?
What about the other sensors and engine mounts.
OK, I have just read that if I use the d15b4 mounts on the d16y4 it should bolt up. Is this correct.
Use the mounts to suite the chassis, not the motor. The carb intake will bolt up to the block. The swap has been done quite a few times. Have a search, there's a couple of build threads here on ozhonda that will give you plenty of food for thought.
did i read this right? carbs on a D16Y4? cool
Yep thats right, just fact hunting at the moment.
nice. g/l with the project.