best cams to run with a turbo

just want a few opinions on that the best cams to use with a turbo on a b18c, ive been told to stay away from skunk2.
aiming for 300hp plus

http://www.google.com.au/search?hl=e...U_enAU479AU479

30 seconds and I found the answers on Google.

Probably Brian Crower.

ITR camshafts work very well with turbo charged applications

I've got a Bisimoto (WebCamz) level 1.2 Turbo Camshaft in mine.
Thousands of happy customers, dyno proven results, and they're at a good price to!
Personally don't see why you'd buy your Camshaft(s) anywhere else.

There are tons of options, type r's to smaller items from most manufacturers.

Being only a 300hp target, you wouldnt need anything to big. Whats the set-up exactly?

gsr cams with gt2871r .63ar with 20psi to make 300whp with a large powerband and run 124mph at the drags.

itr cams with gt30r.

my gsr cams cost me 50$ on ebay and worked very well on the gt2871r

my itr cams also worked very well on my setup with the 30r, although i didnt get to see there true potential before my engine broke, but that made 395whp on 22psi on my b16.

for springs, i had skunk2 tuner springs with gsr cams and they were too soft and my valve train was noisy,

i upgraded to supertech springs and retainers, i believe they had 85lb of seat pressure and they worked very well with the itr cams and boost i was running, nice and quiet valve train.

Std B18C are the best on a budget. The less overlap the better it works best on a turbo.
Can go ITR with adjustable gears to reduce overlap and blow by.
Either option will give you 300hp easy.

for 300hp....stock itr will be more than capable...
as long as u have a decent turbo setup...

tuned length exhaust manifold, and a gt30 turbo with a external gate.....wont need more than 9psi....