WRENCHIN' WITH TRAV - Slotted Rear Rotor Install

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself, OZHONDA nor Underground Imports take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

Aim: To fit a pair of DBA rear slotted discs to eg5 Hatch.
http://undergroundimports.com.au/gal...01/slotted.JPG

Time: 1hour or less

Required:
- Slotted discs
- Car jack
- Impact Hammer(highly recommended)
- Wire Brush
- 14mm, 12mm, 10mm sockets
- 14mm, 12mm, 10mm ring spanner
- 14mm, 12mm, 10mm open enders
- Big hammer

Info:
This is one of the easiest DIYs i have ever done, so easy you dont need a mate ro anything, with proper tools its a breeze. You know u wana do it yourself!!

Step 1:
OK jack up your car, take the wheel off and support the car accordingly.
http://undergroundimports.com.au/gal....jackcarup.JPG

Step 2:
Ok now get out your IMPACT HAMMER and go at the 2 screws holding the disc onto the hub. If u dont have one I doubt you will be able to get the screws out. They are cheap as chips and its always good to have lotsa tools so just go and buy one and do it right.
http://undergroundimports.com.au/gal...c%20screws.JPG

Step 3:
Now it the time to remove the small shield behind the rotor. It has two 10mm bolts. MAKE SURE YOU RELEASE HAND BRAKE NOW AS WELL!! No pic needed.

Step 4:
Now remove the two 12mm bolts holding on the brake caliper to the caliper bracket. Might be a little bit tight but your little sister should be able to get it off.
http://undergroundimports.com.au/gal...oveacliper.JPG

Step 5:
Now u need to take off the brake caliper bracket. Access the two 14mm bolts from behind the rotor.
http://undergroundimports.com.au/gal...ndobrakcet.JPG

Step 6:
Ok now remove the bracket and more the caliper out of the way and take off the rotor, should look like this
http://undergroundimports.com.au/gal..._4a.alloff.JPG

Now would be a good time to clean up the hub and little bit before you install the sexy new slotteds.
http://undergroundimports.com.au/gal..._5.cleanhb.JPG
Step 7:
Ok this is a good idea i think, test fit; i put the rotor on and did up the wheels nuts finger tight just to make sure all with fit perectly and well what do you expect from DBA? perfect.
http://undergroundimports.com.au/gal..._6.testfit.JPG

Step 8:
Here are the 2 discs against each other
http://undergroundimports.com.au/gal...rmal_5a.vs.JPG

Now you have to give the disc a clean (according to DBA) wipe off each disc surface with some NON OIL based cleaner. I used metho. only wipe the disc surface or you will wipe off some paint.
http://undergroundimports.com.au/gal....cleandisc.JPG

Step 9:
OK now put the disc on and refit the bracket, caliper and sheild and your done! Same process for the other side of the car. Once your done, pump the brakes abit and then for a cruise and just take it easy. Do some test brakes and if all it well, well done but if there are some unusual noise take you wheel off and have a look, maybe u missed something. If all else fails please take your car to a professional!

Before:
http://undergroundimports.com.au/gal...mal_before.JPG

http://undergroundimports.com.au/gal...al_before1.JPG

After:
http://undergroundimports.com.au/gal...rmal_after.JPG

Nice write up and read.

Just noticed you have same rims as mine.

Quote:

---

Originally Posted by Chi

Nice write up and read.

Just noticed you have same rims as mine.

---

thanks man, ur av is funny lol. i want some lighter rims tho :(

mmmm coolness... slottness is :D

Verry nice writeup Trav..........nice and detailed with LOTSA pics!

a coupel of things.

WTF is "essennstail" ? QLDer talk for something ? *j/ks*

*edited....Trav assures me the upgrade is eaclty the same dimensions as OEM * :)


Otherwise...great write up :)

im pretty sure they were the same size as stock rotors bren

knowing dba they would be spot on;)

Quote:

---

Originally Posted by panda[CRX]

knowing dba they would be spot on;)

---

rigtht on man :thumbsup:

trav... may i ask how much r those dics?