Just wondering, has anyone used these stop leak things you buy at your local supercheap or so? I know it's temporary but how long does it last for, and is it more likely to stuff up your engine in any way ?
Cheers guys.
Printable View
Just wondering, has anyone used these stop leak things you buy at your local supercheap or so? I know it's temporary but how long does it last for, and is it more likely to stuff up your engine in any way ?
Cheers guys.
I would try thicker oil. I'm guessing that's all the additive does. If it's still bad second hand engine or rebuild current one appear to be the options. Sure it's rings and not valves? Compression and leak down test to confirm?
Havent done the compression test yet. But It's always pissing out smoke so quite sure the rings.
What I would do is, change oil to thicker oil, change oil to different Brand. Addictive will lower the burning oil but will not stop it. Are you sure it's burning oil, not blown Headgasket.
I would rebuild the engine rather than buying 2nd hand engine, or engine swap if you got the funds.
Do a compression test wet/dry/
I agree, rebuild the engine.
Anything else is a bandaid :(
Op
Are you sure it's "bad rings" ?
There are several other issues that can exhibit the same symptoms ( excessive oil loss etc)
Get a leak down test done and find out the exact area of the leak / compression loss
Could be worn valve stem seals, bad PCV System etc.
Get these checked first before rebuilding the engine !
Just another suggestion - please don't use any stop leak or similar on any modern engines- there are very tight tolerances and oil galleries that can get blocked By additives or dislodged oil sludge etc
Okay well thanks for replies guys. I guess a compression test first will answer my question. And no stop leak. Thread com be closed.
I'll keep it open if you'd like to keep us updated?
Fingers crossed for you.
buy a nippon racing rebuild kit off ebay for just over 300 and your laughing full rebuild
try this product, make sure your engine is warm, then add the whole bottle to the engine, after that drive around so it mixes. this will work if you have bad valve stem steals. it'll stop the smoking if that's what you're thinking. good day.Quote:
Originally Posted by BennyH
http://www.supercheapauto.com.au/onl...01#Description
A compression test tells you if a cylinder is loosing compression ( ie leak)....not enough evidence to simply suggest "bad rings"Quote:
Originally Posted by BennyH
Use a LEAK DOWN test to find out where it is leaking from ! Most mechanics should be able to do this