speaker change

i have an ek cxi, just wondering what the best speaker change to do is..

i only want to swap like for like, no cutting etc.. and i would like to know the correct speaker sizes, and what speakers are good for producing stronger bass and where to get them..

thanks.

hey man just do some searches and google search for speakers you want

heres a diy guide for install speakers - http://www.ozhonda.com/forum/showthr...l-for-EK-EJ-EM

hope that helps ya

If your looking for better sound quality and bass I recommend on investing in an amp and maybe sub


6x9 are rear speaker size

With fronts I've got 6.5 inch but I think factory is 6inch (not sure with fronts)

Front: 6 inch should fit without modification as long as they are fairly shallow.

Rear: 6 x 9

I dunno about ek, but my eg had 4's up front (in a plastic surround, which when removed you could fit 6's, which apparently the higher models had) was pretty easy to chuck splits into.

My ek1 fits 6.5inch if i measured correctly. I measured from the left to right as seen in the picture (not sure if your suppose to stop at the dark grey area, or to the metal).

I've searched many places and it has mixed answers of 6 and 6.5.

http://desmond.imageshack.us/Himg23/...pg&res=landing

Those stock speakers are Pioneer TS-06198ZH. I cannot find it in the manual but I mostly see it as a 6.5inch on various websites.

Hope this helps and keep us updated on your choice! :)

Quote:

---

Originally Posted by Honda

My ek1 fits 6.5inch if i measured correctly. I measured from the left to right as seen in the picture (not sure if your suppose to stop at the dark grey area, or to the metal).

I've searched many places and it has mixed answers of 6 and 6.5.

http://desmond.imageshack.us/Himg23/...pg&res=landing

Those stock speakers are Pioneer TS-06198ZH. I cannot find it in the manual but I mostly see it as a 6.5inch on various websites.

Hope this helps and keep us updated on your choice! :)

---

The basket on alot of the aftermarket 6.5 inch sperkers will not clear the door trim without it being modified.

Quote:

---

Originally Posted by TbM

The basket on alot of the aftermarket 6.5 inch sperkers will not clear the door trim without it being modified.

---

Will the screw position be in the same place though? for stock and most aftermarket speakers

Quote:

---

Originally Posted by Honda

Will the screw position be in the same place though? for stock and most aftermarket speakers

---

Not that ive seen, aftermarket usually has 4 screws evenly spaced not 3 like the picture you have shown.

Surely you could just put a thin mdf spacer in there, screw that to the stock holes, the screw the speaker to that?

Quote:

---

Originally Posted by Drifter995

Surely you could just put a thin mdf spacer in there, screw that to the stock holes, the screw the speaker to that?

---

just screw the 4 screws through the door plastic, if you dont overtighten the screws it should hold or you can use those backing things they usualy supply with speakers