b18c2 in ek4 wiring HELP

i suspect i lunched my b16a and have a b18c2 out of a 1994 dc2 vti-r sitting at home doing nothing. loom wise will i need to do anything or should it all plug and play. i suspect that the b18c being 94 would mean is obd1 and ek4 body loom to be obd2a but other than a conversion harness what else would i need to do??

You will need to modify the EK4 loom as some of the plugs are different.

Alternator, distributor, injectors..

Plus need to add IAB for C2, change location for IAT, add in VTPS

Quote:

---

Originally Posted by skonas

i suspect i lunched my b16a and have a b18c2 out of a 1994 dc2 vti-r sitting at home doing nothing. Loom wise will i need to do anything or should it all plug and play. I suspect that the b18c being 94 would mean is obd1 and ek4 body loom to be obd2a but other than a conversion harness what else would i need to do??

---

wtf?!

Ok and if the head is good and I use that with the b18 bottom end I would avoid having to do that would I not? Obv having to change to an 18c ecu

You'd be doing a franky then.

It's more then a bolt head off bolt onto bottom end situation to my knowledge.

Do the B18C2 swap and just get a converter harness.