H22 intake manifold

Hi peoples,

Just wanted to know if anybody has any suggestions on the best intake manifold for a H22 would be...engine is in a del sol. Was looking at Edelbrock???

skunk2 the best as far as i know, or euro R IM?

i hear u can use a K series manifold?

Yeah you can, a member in here was or is selling a h to k manifold adaptor.

http://bisimoto.com/store/index.php?...roducts_id=459

Skunk 2 manifold is over rated.(unless you want the bling factor) you can either modify your existing one by gutting the butterfly on your existing one with a spacer..
Also the k2h adapter is available.
But overall type s intake is great but just a lil bit hard to find

Blox.....same design as junk2 for half the price!

http://www.tamparacing.com/forums/ar.../t-386109.html

Quote:

---

Originally Posted by MRJDM

Skunk 2 manifold is over rated.(unless you want the bling factor) you can either modify your existing one by gutting the butterfly on your existing one with a spacer..
Also the k2h adapter is available.
But overall type s intake is great but just a lil bit hard to find

---

Have you tested both manifolds? I have a h22a in a EG sedan and have dynoed both manifolds and there is quite a bit of a difference and well woth the money. Most ppl get the throttle body size wrong. you need to make sure your TB is the same size as the inlet on the manifold, which is 68mm from memory, but i gained massive in HP and Torque. cheap HP.
Cheers Spud

Quote:

---

Originally Posted by T.H.O.R.

Have you tested both manifolds? I have a h22a in a EG sedan and have dynoed both manifolds and there is quite a bit of a difference and well woth the money. Most ppl get the throttle body size wrong. you need to make sure your TB is the same size as the inlet on the manifold, which is 68mm from memory, but i gained massive in HP and Torque. cheap HP.
Cheers Spud

---

Google it all over the web man