when i hit vtec my headunit will turn off
then back on after 5-7 seconds when out of vtec
what could be causing this?
this is in a em1 wtih b16a
only mods to car are Pod filter and lowered.
Printable View
when i hit vtec my headunit will turn off
then back on after 5-7 seconds when out of vtec
what could be causing this?
this is in a em1 wtih b16a
only mods to car are Pod filter and lowered.
Perfect! Lets you hear the VTEC, yo.
could be a loose power wires and when u vtak, it pushes the head unit back and loose the connextion. since it turns off, i think you should check the power wire coming out from your head unit to the power source and see if there is any damaged.
Quote:
Originally Posted by TOm.C
DAT CONSIDERATE ENGINE, YO!Quote:
Originally Posted by Indie
lel
lmfaO
get your earth grounding line is loose and gets more loose when you engage vtec... i would suggest to pull the deck out and checks the wires...
I've checked all power/ground wires, nothing is loose or damaged.Quote:
Originally Posted by connorling
The Engine is drawing so much power in vtec. That it sucks all the voltage from the battery. I think u better down grade your motor. Or at least look at a bigger alternator and battery to handle all that power and current drawn during vtec!
Other than the reason above. I doubt it be a ground from the motor to the chassis. As the inner car circuits have a separate ground! Pull your deck out and check the wiring. Also check the fuse box to see that the fuse in in correctly. not half hanging out!.
Check your vtec fluid
on a more seirous note, is your alternator keeping up? Does anything else die?
take your head unit out and check if the plugs and wires are loose !
suck shit mate