-
hi!
i currently have a SOHC 1.6 Vtec and im considering converting my engine to a B18c - i am new to this forum and i need to know if anyone has made this conversion before (in this forum) will i be able to swap without making any alterations to the mounts or whathaveyou? can i just take out the SOHC currently installed and implement this B18c and use the same gearbox etc? can i just plug the existing wiring harness without having to splice wires and change the connector thingies etc???
please help me i need help thanks!
~
Xavier
-
we have more than 1 car which has done the conversion..
it's a straight bolt in bolt out...but the brakes and the suspension should be changed to the b18c counterparts
if u want more info PM me
-
wat car do u have btw?? which b18c u after?? b18c-vtir teg or b18c7 ITR?? how much is ur budget??
-
ok i have an EG, 94 vti - i want b18c (the most cost fesable version) i want bang for my buck! i was going to purchase a b16a from a del sol crx for $1200 but i figured if i can get more horses for a bit extra cash i would rather that... let me know what you think... i dont require the whole front cut (gearbox etc..) i only want the bits i actually need...
cheers for the quick response guys!
-
are you going to do the conversion urself??
-
yeah i want to - thats why im askin ;) so yeah... do most people get it done by a pro or do it them selves in this forum? i wanna give it a go.. never done anyhting like this before but im a bit of a tech nerd so i wont find it too hard i recon!
-
Its best to spend alittle more in the first place, rather than have to pay up even more after !
A well known proverb that applies to all CAR mods etc :)
Personally , i am in the middle of a engine conversion with a friend - and it will be a challenge. Cheaper , but will have various bugs and glitches along the way.
But, give ur car , engine and bits to a pro mechanic , plus cash , and they will install it for you , hassle free , and with guarentee.
Its your choice mate.
Good luck.
-
ok... i have a mate thats a mechanic... i might get a bit of help from him... he has all the proper tools etc too... so can anyone suggest the best way about getting a b18c? the only gear i have been able to source is either tooo expensive or seems a little dodgie.. i would like to do this the most cost fesable way..
:?
-
if u are doing this big project...u may as well buy the whole car.....the whole engine n gearbox is almost straight fit....just slight mod on the engine mount.... front caliper change....well....cut the crap....its really the whole front cut of the whole Integra...........
-
if u are doing this big project...u may as well buy the whole car.....the whole engine n gearbox is almost straight fit....just slight mod on the engine mount.... front caliper change....well....cut the crap....its really the whole front cut of the whole Integra...........
-
haha!
yeah i expected that...
-
fair enough... hehe might go the front cut... i have 2 grand to spend so far... as i mentioned earlier i dont mind spending the extra cash just wanted to do this project so i can learn a bit... :) i was looking on the USA ebay sites they are selling them for USD $2000 and cheaper... they claim that they are all from Japan... does anyone here have any japan connections? what are the import taxes and costs like for getting them here? i just wanna know what im up for...
