Printable View
Hi guys, looking at buying some extended wheel studs for the front of my dc2r, the set I've found are arp and 2.85". But I have no idea on the length of the standard studs to compare with. Anybody know the specs? I only want to go about 10mm longer than standard
is that measurement of the thread+spline?
I think it's total length, but I have no idea
well take your wheel off and measure the length from the tip of the thread to the rear of the plate.
ie:
http://www.karcepts.com/shop/img/p/53-268-thickbox.jpg
but unless you know how that one is measured wont be much help i dont think.
arp wheel studs are much longer, for eg. im running them with project kiks wheel nuts and they poke out the ends. are you trying to fit spacers or something?
Most of the aftermarket extended studs are all roughly the same length billy.
Worse comes to worse you will probably have to use open ended wheel nuts.
Yes trying to fit spacers so my wheels will clear my calipers. What's people's thoughts on the maximum thickness spacer that can safely be run? Just a slip on, standard studs
5mm..Quote:
Originally Posted by crobaa
Fingers crossed I won't need more than a 5mm spacer