How Can I Go Lower?

i had my delsol at close to the lowest it can go (on bump stops) for a couple weeks and yet it still is relatively high! like about 3" above the back tyre (15s with 50 series profile).

i really want it to be sittin on the tyre with 16s (45 profile) or on the rim with 17s, but if its on the bump stops and its still not low enuf what can i do??

any help is appreciated!

-RaF-

wot type of suspension/springs are u running at the moment?

my friends del sol is slammed on kings.. cant remember if theyre lows or superlows tho..

jus standard atm with kings!


and its slammed?

has he got standard shocks in atm?

sorry.. Im not sure how low it is. but its quiet low with superlow king springs...

just get bigger wheels and ur set..

or get.. custom height KMAC ones :)

Quote:

---

Originally Posted by raff

i really want it to be sittin on the tyre with 16s (45 profile) or on the rim with 17s, but if its on the bump stops and its still not low enuf what can i do??

---

I have 16's with 205/45 rubber, King Low's on my del sol. At the rear there is about 1.5 inch gap. Front is about 1 inch. I think with super lows the rear would be really close to the rubber and front would be just past the rubber.

I don't know how you can your car on bump stops and still be 3" above the rubber, unless your bump stops are 4" long. Super lows should be maximum 1" above the rubber.

Quote:

---

Originally Posted by raff

i had my delsol at close to the lowest it can go (on bump stops) for a couple weeks and yet it still is relatively high! like about 3" above the back tyre (15s with 50 series profile).

i really want it to be sittin on the tyre with 16s (45 profile) or on the rim with 17s, but if its on the bump stops and its still not low enuf what can i do??

any help is appreciated!

-RaF-

---

neither do i

something seems to be wrong here... any car on bump stops is low... if you wanna go lower you can getthe shocks machined... but if your sitting on bump stops i dont thinkk it will do much..

you can always cut your bump stops or shave them down... but i dont suggest this unless you know what your doing and 100% sure of it!

i agree, i don't understand how its possible to be 3" above the tire on superlows, thats like stock ride height.

are you sure you put the springs in?

LOL, maybe you brought springs but put the original ones back in?

just take them out all together...

nah suspension joint did it!

maybe they dont know jack shit!!

newayz im egttin it checked out tomorrow!

i will let ya's know how it goes.....