Printable View
Hi All
I have purchased a clutch masters stage 1 kit with flywheel, all good but the thrust bearing is very different to the oem bearing as per photos, I cannot see how the spring attaches? and the depth of the new bearing is 30mm and the depth of the oem is 34mm?
Also, I have heard some peeps purchase brand new flywheel to crank bolts and others do not? whats best?
Attachment 25976Attachment 25977
any help appreciated
Cheers
Fine to reuse old flywheel bolts, just clean them and maybe chuck a dab of loctite red for piece of mind.
Only torque to yield bolts should be replaced every time, which our honda do not use on the flywheel bolts.
ok defiantly put some loctite on, any recommendations on the thrust bearing issue?
forgot to state its a b16a, if that matters
Sorry have no idea, maybe contact the supplier, im sure they will be able to help. Otherwise, maybe someone can chime in on here.
u got cable gearbox, the bearing u got from clutch masters is for hydraulic gearbox
yea mine is cable, clutch masters said it could be used for either? I wasn't sure about this initially but he was adamant its should be fine
http://1.bp.blogspot.com/-PY1ntwdqtc...s1600/Doge.jpgQuote:
Originally Posted by monda2
http://images3.wikia.nocookie.net/__.../0/01/DOGE.png
http://1.bp.blogspot.com/-PY1ntwdqtc...s1600/Doge.jpg
nah cant use it cos the fork is different.
mochi deadliest kunt