[DETAIL Toyota 86 Detail & Paint Correction

Booked in for;

■ Paint Protection
■ Full Interior Protection;- seats, floor mats, carpets, boot area & trims
■ Wheel Protection
■ Paint Correction if required

We have worked on many 86’s and BRZ’s since release, and they still keep coming!

However we cannot stress enough how soft the paint is on these, especially darker colours so for any owners out there please use the two bucket method, a microfibre wash mitt and a waffle weave towel or microfibre chamois (not pva, leather/skin or synthetic), or you will unfortunately mar your paintwork very quickly after just a single wash.

This Black 86 was less than 2 weeks old when it arrived to our Brisbane Detailing Studio for Paint & Interior Protection. We had asked the customer not to wash the car to avoid any further chances of marring the paintwork. Although it seems the dealer had already induced some wash marks into the paint 


The process;

Using the Autobrite Snow Foam + Mint APC, this would dwell and help remove any pre-wax (pre delivery) product that was on the vehicle that normally hides any fine marring fairly well. This allows us to inspect the paint, correct it and of course protect it.

A full decontamination process was used (standard) with 1Z Colourtec for any iron fallout, and our favourite dodo juice clay bar to remove any surface contaminants. Of course to no surprise, contaminants were found!

Few areas of marring were found and quite a lot of water spotting/etching, so it seemed like at least a single stage correction was required to bring the paintwork on this 86 to our standards.


Bird dropping & Water spotting quite evident = not friends of Black paint.

http://i302.photobucket.com/albums/n...psd89e7d3c.jpg

http://i302.photobucket.com/albums/n...ps031c6fbc.jpg

http://i302.photobucket.com/albums/n...pseed179ab.jpg

http://i302.photobucket.com/albums/n...ps24ba448c.jpg

http://i302.photobucket.com/albums/n...ps987132a4.jpg

http://i302.photobucket.com/albums/n...psdbaf33c8.jpg

http://i302.photobucket.com/albums/n...ps415394db.jpg

http://i302.photobucket.com/albums/n...ps6a7642c4.jpg

http://i302.photobucket.com/albums/n...ps9542da86.jpg

http://i302.photobucket.com/albums/n...ps0d0ec1df.jpg

http://i302.photobucket.com/albums/n...ps398b5174.jpg

Dodo Juice Gentle Grey Clay Bar did pull off a bit of contaminants, considering this was/is a brand new vehicle!

http://i302.photobucket.com/albums/n...psf9fa1b48.jpg

http://i302.photobucket.com/albums/n...ps63ae2f95.jpg


No luster, no metallic pop, no depth – definitely can do more with this one!

http://i302.photobucket.com/albums/n...ps62a43660.jpg

Marring you say?

http://i302.photobucket.com/albums/n...psac1782dd.jpg

http://i302.photobucket.com/albums/n...ps7af3c9e6.jpg

http://i302.photobucket.com/albums/n...ps7af3c9e6.jpg

http://i302.photobucket.com/albums/n...ps832f498c.jpg

http://i302.photobucket.com/albums/n...pseada41dd.jpg

http://i302.photobucket.com/albums/n...pse8d741bf.jpg

http://i302.photobucket.com/albums/n...ps9c6341c8.jpg

Starting on the correction

[img] http://i302.photobucket.com/albums/n...psb32dc276.jpg
[/img]

http://i302.photobucket.com/albums/n...pscc1ea08f.jpg

http://i302.photobucket.com/albums/n...ps95f98405.jpg

Reflections?
http://i302.photobucket.com/albums/n...psfd622f9d.jpg

http://i302.photobucket.com/albums/n...psa2417e29.jpg
http://i302.photobucket.com/albums/n...ps32c25c81.jpg

Using Nanolex Surface Cleaner to prepare the surface by removing any leftover polish residue and contaminants.


http://i302.photobucket.com/albums/n...psc283e1ca.jpg

Nanolex Application

http://i302.photobucket.com/albums/n...ps6f6cb043.jpg

Finishing results;

http://i302.photobucket.com/albums/n...pse5394b29.jpg

http://i302.photobucket.com/albums/n...psc5ce35f7.jpg

http://i302.photobucket.com/albums/n...psba7bb3d0.jpg

http://i302.photobucket.com/albums/n...ps68fac242.jpg

http://i302.photobucket.com/albums/n...ps2862875e.jpg

http://i302.photobucket.com/albums/n...ps8f7fbf51.jpg

http://i302.photobucket.com/albums/n...ps9495a22c.jpg

Thanks for looking; any questions or comments are more than welcome.


Car Care Products do offer Premium Detailing Services such as Paint Protection, Matte Paint Protection, Detailing & Paint Correction + more in our Detailing Studio's in Sydney, Brisbane and Melbourne. If you would like a quote or further information please feel free to contact us on 1300 006 007, or email info@carcareproducts.com.au

And of course, for those who want to DIY including any paint correction & detailing please do not hesitate to contact us. We are more than happy to advise what you need to complete the job!

Cheers