Jacking up a CX-5 using control arms??

I just wanted to clarify, being a Honda driver where jacking up an entire car is easy (trolley jack on front centre and rear jackpoint being the tow bar).
Having had a look at the underside of the wifes CX-5 theres quiet alot of plastic skid-plates for protection so i wonder how i can jack the car up and place jack stands?

http://i59.tinypic.com/14t4ldt.jpg

I was thinking, if i wanted to put my jack stands on the pinch welds on the outer sides of the car (blue circles), is it possible to jack up the car's 4 corners from each wheels control arm? (the red circles).
Would i bend anything by doing this? i'd be using a block of wood in between just to even the load a little also.

Could i potentially bend something and affect wheel alignment?



Or if anyone has done it an easier way, please advise, would love to know =)

Anyone have a suggestion? Could just drive it up Ramps, but am very curious how to go about it if i was to use jack and stands.

Is there no factory manual that gives u the jacking points?

Here is the cx9 reference

http://www.mazdas247.com/forum/attac...2&d=1226783607

Perhaps use it to identify areas on your car.

Quote:

---

Originally Posted by curtis265

Is there no factory manual that gives u the jacking points?

---

There is, but all it says is use the pinch welds. If I am putting the stands on the pinch weld then where do o Jack it up from?

Guessing I'd need to remove all that plastic before I can see any crossmember then

OK I think ive figured it out where the centre front and rear jack spots are.

For the rear though it says to jack it up by the diff, can I just confirm with the pictures attached that im looking at the right part. Im 95% sure but just wanna be certain, I found the front point no problem, its just now the rear diff.

Is it the squarish looking thing in the centre of the image that's attached to the diff, im guessing they don't want us to jack the diff directly so adding the squarish thing as a jacking point?

http://s29.postimg.org/3zqnsacbr/IMAG0188.jpg

http://s28.postimg.org/5g5al2ehp/IMAG0189.jpg

anybody can confirm this?

Yep see that tab hanging down is the jack point

That is a really clean underbody
I feel like eating off of it

its a brand spanking new car thats why hahaha
2014 CX-5

Quote:

---

Originally Posted by philip_pc

its a brand spanking new car thats why hahaha
2014 CX-5

---

man you should take a look under my old mini. Its a layer of dirt , then sound deadener , then rust , then dirt then paint and then clean metal lol