Just want to know whether mounts and linkages were needed?
Printable View
Just want to know whether mounts and linkages were needed?
ask Mojo teh flashy monkey....he did it
mounts are the same for all D serise
linkage should be the same
Not true. Earlier D series engined cars use a front mount too ontop of the usual 5 others - so factor this in IF you are buying a newer ZC/d16a8 out of say a EG civic. Also will you use hydraulic or cable gearbox ? And dont forget too about changing a carb'd layout to EFI too - need efi fuel tank + wiring + ECU + other bits n pieces...Quote:
Originally Posted by [[d a n n y]]
but still be using the same mounts from a ED serise
+ 1 front mount possibly :)Quote:
Originally Posted by [[d a n n y]]
PM "mojotheflashymonkey" for more info - he recently purchased a d16a8 off me and isntalled it into a ED sedan of recent - should have an idea of what is needed.
well all ED/EF have the front gearbox mounting in place..
so unless were talking about calble----> hydro conversion
you'll still be using a TEG/ED running cable gearbox..
so in that case yes the mounts are not needed
I did an engine swap recently,
the ZC front engine mount had to be changed to fit this ZC into a 2nd gen CRX.