Pod Filter Question

Hey guys,

Chucking a pod filter on my 90 Accord EXi tomorrow and I was just wondering if anyone has any idea's for connectors? Im using the stock intake pipe so I was hoping something that fits in that.. Ive read up on the idea of using a plain 2 1/4"-3" paint tin, and using a can opener to remove both ends, then just shoving it in the intake pipe until its secure, but went around a few stores today (Hardware store, Dulux Trade Center) and couldnt find this.. Is it worth buying a normal piece of piping and doing it, or are there cheaper connectors made specifically for this from shops in Sydney..

Cheers

ok......next to the pod filter in your autobarn there should of been connector next to the filters...ask the guy there tommorow and he will show you exactly what you need i think they cost like 12.00

ive sent you a email ok

Guys,

Just a question about removing the stock air filter box..

There is a pipe leading from the air filter box

http://img85.imageshack.us/img85/145/edited0pn.jpg

To another box of some sort shown here

http://img81.imageshack.us/img81/5618/edited28rz.jpg

This box is then connected via a lead

http://img133.imageshack.us/img133/8304/pipe8xb.jpg

Read next post

To the fuel injector..

http://img134.imageshack.us/img134/4996/pipe30oy.jpg

Now if the suction to the box pictured in the second picture is removed (when I take the stock air filter out) is it going to cause any problems to the fuel injector?

Cheers

Scott1e i have the 4th gen accord like yours too but i fitted an intake setup i bought at autobahn for i think around under 100 dollars. Which includes pod plus metal pipe and fittings.

I pulled out the old stock box but i still left that lil box next to the battery on the left the one u mention that had a pipe that leads into the air filter box. Theres a vacumm hose that ur scared might damage something if you dont connect it back up yeah?
Dont worry, i drove my car around and didnt notice any problems, i think its vacumm line number 8 if my memory serves me right. If you pull it out, just seal that hole that comes out of the fuel injected. Cut a small piece of hose and at one end put a screw into it and then shove it back to seal the hole?

If not just buy a long vacumm line and connect it back up.

Yer thats right mate... So basically as long as I plug the hole there shouldnt be any dramas?