hey, im getting my new clutch within the next week or so, i was gonna do it myself but read up on some stuff. Will the flywheel need machining to do the job properly? and will it be a straight swap for the clutch?
Printable View
hey, im getting my new clutch within the next week or so, i was gonna do it myself but read up on some stuff. Will the flywheel need machining to do the job properly? and will it be a straight swap for the clutch?
better off machining it
dont have to, but it is best to do so
what I do if its not majorly screwed is give the friction surface a real good rub with emery paper to deglase it.
The thing about it is that since taking the gearbox off is such a big job, almost more work than actually popping an engine out. Usually people do everything down there while its off.
Things you should do include...
- Machine flywheel($50)
- Replace Flywheel Spigot Baring($5)
- Replace Thrust/Throwout Baring
- Inspect/Clean Shift fork
- Re grease shift fork.
- Re-grease Input shaft splines
- Re-grease Thrust baring inner surfaces
As long as you use a torque wrench for your flywheel to crankshaft and pressure plate bolts, taking your time this is an easy DIY, can easially do over a weekend. Take box off Sat morning, Machine flywheel in the avo, install everything on Sunday.
Be sure to bed in your clutch for at least 1000Kms and you should have no problem. You can also put that $600 laybour charges back away in your bank for a Holiday! :D
Regards
Kyle
dont forget to add the rear main seal to that list :)
thanks alot for that everyone, il look into it all before i start pullin shit apart! And is it a problem with the gearbox if the car misses gears when changing quick or is it from the clutch being worn?
I would look into your shift linkage bushings. Worn bushings make your stick feel sloppy and give you alot of movement. By getting new ones it will tighten the feel of your shifter making it more accurate, eliminating the chance of missing the 'H' pattern of your gearbox.
Getting mine changed right now by mechanic shop.....
Is it necessary to use Honda gear box oil....???
You don't have to put it in. Although it's Cheap, Genuine and efficent lubricant. So why not. By putting in thinner performence oil you are just increasing the amount of wear on your gearbox components. And since your not in a 1st Class Japanese Racing team where every 0.1hp counts it just doesn't make sence.
thats exactly what happen and how it feels, when in gear the stick moves as much as it would in neutral, from side to side. could you estimate the price of getting that fixed?Quote:
Originally Posted by kyle
Would really depend on whether you got OEM or After market Poly Urathane. OEM would probably be around, i dunno say $50(thats really a guess there), Poly Urathane a Bit Cheaper.
As above.. what grease do i need to use on the parts?Quote:
Originally Posted by kyle
general purpose? the black stuff...
and do i also use it on the cv splines too?