hey guys
after info on my run around, specs and anything else
its 85 civic hatch
EW2 motor
most info points to US civics with different motors
Specifications:
http://www.drive.com.au/buy/market_v...y=3D+HATCHBACK
Printable View
hey guys
after info on my run around, specs and anything else
its 85 civic hatch
EW2 motor
most info points to US civics with different motors
Specifications:
http://www.drive.com.au/buy/market_v...y=3D+HATCHBACK
all i know is you should dump a d16a8 in it like they came in the Si variant....
ever played GT4 with the 87 Mugen civic? no vtec in that thing and it kills everything....
i do know they have crappy sussy....
hahaha yeah i cant wait till the motor dies!!
what parts are interchangeable?
i want new seats... so uncomfy
the front just has shocks no springs.. i havent checked properly how its setup...
but the back has spring shock setup
i wana drop it... any1 lowered the 3rd gen b4?
The car has a torsion bar set up at the front. To lower it at the front you have to adjust the torsion bars.Quote:
Originally Posted by incoming
86-89 integra da3 seats bolt in (very comfortable). There are a two different rail set ups in the 3rd gen civics so if in doubt just use the 3rd gen rails.
King springs make a low spring for the 3rd gen for a cheap and easy rear drop. Companies like Ground Control in the states make a coil over for most aftermarket shocks, which you'll probably have to get from the states as well. Koni and Tokico make good adjustable shocks for the 3rd gen.
All this and more info can be found on
www.redpepperracing.com
:D
whats the model name of this civic?
eg ED/EF, EG EK and so on?
was just about to give the same link, best side ever for old school civic'sQuote:
Originally Posted by G AE82
AH CivicQuote:
Originally Posted by incoming
whats the AH equivalent in the States?
theres limited info on the lil beast!!
thanks in advance
i think its HF
Im pretty sure the Integra torsion bars would be interchangable as well. Would give you better handling as they are stiffer - so you can lower the car without the fear of bottoming out.
which yr/model teg? LS?
Which ever one has the torsion bar sussy at the front.. 84/88?
not too familiar with the models of the tegs... i just go by the parts hehe.