Got a bottom end for free the other day and just took a hour to tear it down. Here is a link to this bottom end. We think it is out of a 1991-1993, I am guessing, Honda Prelude. It had been sitting at a friends house for a year and his dad wanted it gone. You might like the pictures. Wasn't pretty to pull apart and is very dirty. Just a reminder to keep your motors clean too!
Here's a few pictures!!
Guess how much of the timing belt is wrapped in there?
http://www.strathlan.com/CMS/images/...ein/Stein5.jpg
Yes the whole thing! Don't ask how this happened. I don't want to know myself!
http://www.strathlan.com/CMS/images/...ein/Stein6.jpg
Keep the oil changed, having sluge can hurt your motor!
http://www.strathlan.com/CMS/images/...ein/Stein9.jpg
Hmmm, spun bearing?!!
http://www.strathlan.com/CMS/images/...in/Stein12.jpg
Best case scenario is that the cylinders will need honed, the crankshaft will need polished, mains line honed, and rods will have to be machined and polished. About $400 in work and $500 in parts. Then new bearings and rings ordered. If he had kept the oil changed and the outside of the motor cleaned I bet none of this would have happened!!
