Hi,
Has anyone tried installing foglights on the 06 Euro? Honda advise the job takes about 2 hours.
Just wondering if anyone has done this before or better paying the dealer a couple hundred to do it?
any tips/suggestions would be helpful.
Cheers
Printable View
Hi,
Has anyone tried installing foglights on the 06 Euro? Honda advise the job takes about 2 hours.
Just wondering if anyone has done this before or better paying the dealer a couple hundred to do it?
any tips/suggestions would be helpful.
Cheers
The genuine OEM foglights?
Its not that hard - its more time consuming than difficult. you need to remove the bumper which is a bit tricky but once you know how to do it its not that bad (took me 25 minutes first time).
It comes with instructions, so have a look at that and decide if its too hard for you.
yep - the OEM lights including the colour coded garnish.
I'd imagine the instruction kit would include the instructions on removing the bumper.
As long as there is no drilling/cutting/electrical splicing involved i'd be comfortable doing it.
I'll pick em up tomorrow w/ the instrcutions.
you would have to route the electricals too. Plus you need to install the switch for your fogs.
all the electricals would essentially be 'clip on' and the switch would just be a a matter of carefully popping the cover around the area that has provisions next to the VSA switch....
or is it something more.....?
The switch is part of the headlamp switch on the steering colomn.Quote:
Originally Posted by EuroBoy
Mine were fitted when i bought the car new. If you saw my other thread in here you can note that you cant buy the lights seperately if you break one.
Thats different, I havent seen that as yet. The kits that I have seen have a switch next to the VSA button. :oQuote:
Originally Posted by swguy
The kit with the switch on the headlight stalk is the OEM Honda one that comes with the Lux.Quote:
Originally Posted by EuroBoy
That is the OEM kit I have too - with a switch next to the VSA buttonQuote:
Originally Posted by EuroBoy
I had to replace the blinker moduel
But it was easy as
im sure you need to do some wiring that might take the longest. you don't want to short anything either mate.
It is supposed to be click and play - ie you don't need to solder, tape wires together.Quote:
Originally Posted by Butso