16x6.5 +40
Will this size rim fit a dc2r with no clearance issues
Printable View
16x6.5 +40
Will this size rim fit a dc2r with no clearance issues
i prob fit jomsy...not 100% sure.
i had 16x7 +42 and it fit nicely
i was told that 16x7 +38 would sit nice under the guards
If i can remember correct ( I'm getting old )
On a front wheel drive car you should not change the offset of your wheels from standard
I think the offset for honda integra is 45 ( please correct if wrong)
....its illegal for starters .(that doesnt stop some of us)
....it also affects the handling in a bad way:thumbdwn:
^^^
but because original wheels are 5.5" wide thats why the offset is 45
now hes goin from 5.5" to a 6" wide the offset needs to be lower or else the wheels ill pump out of the guards
its possible to run up to 7 inch wide rim with 215 tyre with 45 offset and no rubbing ....no need to change the offsetQuote:
Originally Posted by teaseR
What wheels are they? The wheels will clear the extremitys no problems. But you also need to make sure they clear you calipers. Best bet is to fit them and make sure they clear.Quote:
Originally Posted by Jomsy
Maybe, but thats pushing it I think. I have 16x7, +40, 205 tyres on my DC2R. Front is no problems, but my rear tyres are extreemly close to the lip of the guards, no rubbing at all.Quote:
Originally Posted by teaseR
Yes, agreed. :thumbsup:Quote:
Originally Posted by b20b
Good answer DL001. It should fit without clearence problem.
They are the stock wheels off a r33 gts-t, less that $100 for 4 with tyres
dude...you are aware that lower offset increases the track right? so if you really want to maintain the same track as before but use a wider wheel then the offset has to increase.Quote:
Originally Posted by teaseR
5.5" wide +45mm offset = 6" wide +51mm offset
they will fit jomsy
i have 16x7 +38 and they fit fine