DA9 ( (IAT) Intake Air Temperature sending unit????

hi guys! i'm trying to locate the I.A.T. - Intake Air Temperature sending unit from my DA9 and i was told that it is a connector/plug with two wires cusually connected to the air intake, manifold or around the throttle body... I'm not sure where it is but i found this plug shown on the picture attatched. Please look at it and tell me if this is the one that i'm looking for... just want to be sure? if not, what is it? hehehe thanks heeps!

http://i12.photobucket.com/albums/a207/kla80t/2.jpg

http://i12.photobucket.com/albums/a207/kla80t/1.jpg

Thats your TPS, IAT is behind your fuel presure reg, below the boot on the throttle cable

???? sorry, im not very familiar with where things are specially the tech stuff. so this means that this is not the one that i'm looking for, right???

right

follow the arrows, its white and it has a connector with 2 wires as you said

thanks i shall check it out first thing 2moro morning as it is now freezing cold outside! thanks for your help guys! and i will let u know 2moro if i found it!

since i couldn't be bothered to go check my car out in the cold.... i found this from my research! yey!

http://i12.photobucket.com/albums/a207/kla80t/iat2.jpg

http://i12.photobucket.com/albums/a207/kla80t/iat1.jpg

IAT sensor it attached to one of the runners of the intake manifold. top right.

Wow a B17A1 engine, i didnt know DA9s come in a 1.7L, or am i reading it wrong?

yes it did come in 1.7l but very very rare

Wow, was it Vtec or not like the B18A engine?

vtec yo