Printable View
I am installing an ITR intake on my b16a1 ef8
and have this device on the firewall
http://i8.tinypic.com/4vfgaqs.jpg
there isnt really any vacuum lines to the intake in which i can connect it to..
what does it do.. do i need it.. how can i rig it to the itr mani?
Just move it to somewhere else on the firewall. Looks like the fuel vapour thingy.
is it removable?
i think 1 line went to the manifold and other to the fpr
Its the purge control solenoid valve
One hose goes to the fuel evap canister,the other hose goes to that nipple shown in the pic above on the rear of the manifold
i double checked
it had one line going to the fpr and one to the mani
none to the canister
canister has one to the TB and one to firewall (to the fuel tank)
???
removable?
There should be 3 hoses to the canister,the top nipple on the canister goes to that solenoid controlling the purge of the canister,are u sure there wasnt a tee off goin to the fpr?
Ignore what i said,i just found out that its a fpr cut off solenoid valve,not a purge control,u were right.
I couldnt tell u what purpose it serves,but at a guess i would say its removable,OBD1's dont use one.
i made some art for your crxer:
http://i13.tinypic.com/643ua1d.jpg
i Made My Art For Nothing!
so does anyone know if it is needed
i am still obd0
i guess it is there for a reason
ok the orange line is the vaccum for the MAF sensor. So you def need that.
As for the green line, seems like you might need it. Try just running a vaccum line directly to the FPR and see if it has any effect. If it doesn't then piss the unit off.
Dan, its best u retain them all as they do affect the way the car accelerates with the stock computer.
Easiest solution for you is to run a vacuum manifold that we can provide to you for next to nothing, and it will give you many more ports for vacuum. if ur unsure shoot us a pm