civic face lift grill..

I'm under the impression for a facelift model i cant make the mesh grill? is this correct? I did it to my car and it was easy, no problems but its a prefacelift.

Anyone know?

thanks

Hey man, the face lifted grill is a single piece, you cant modify it to make it like the mesh grill unfortunatly. The only way is to buy a facelifted mesh grill.

Quote:

---

Originally Posted by Muzz

Hey man, the face lifted grill is a single piece, you cant modify it to make it like the mesh grill unfortunatly. The only way is to buy a facelifted mesh grill.

---

hmm... i did it to my facelift model.

took off old grille, unscrewed frame off big honda plastic thingy. cut piece of mesh. screwed it to the frame and then cable tied the thing onto my front bar.

havnt had any problems.

Quote:

---

Originally Posted by Muzz

Hey man, the face lifted grill is a single piece, you cant modify it to make it like the mesh grill unfortunatly. The only way is to buy a facelifted mesh grill.

---

its possible. i've seen it done;)

True? I know it can be done with some cars like the ej8 and such.
All i know is with my 99 ek1 hatch, you cant actually unscrew the centre piece and replace it with mesh unfortunatly. Its a solid piece.

There was a thread about this topic, let me see if i can find it.

Quote:

---

Originally Posted by Muzz

True? I know it can be done with some cars like the ej8 and such.
All i know is with my 99 ek1 hatch, you cant actually unscrew the centre piece and replace it with mesh unfortunatly. Its a solid piece.

There was a thread about this topic, let me see if i can find it.

---

yeh, u don't need to take it out..
saw the middle off like how its done with pre-facelifted models.

refer to this thread:
http://www.ozhonda.com/forum/showthr...ight=ek9+grill

Working out how your going to stick the mesh onto the grill is the hard part.

im 100000000% sure i didnt saw anything off. There were some screws that screwed it to the grille. I just undid the screws.

what happened to the black part where the honda badge is?

did you just put mesh right over it?

Quote:

---

Originally Posted by honda_ek4

what happened to the black part where the honda badge is?

did you just put mesh right over it?

---

you have to cut it out with a dremel tool.

Quote:

---

Originally Posted by Bodgy Racing Developments

im 100000000% sure i didnt saw anything off. There were some screws that screwed it to the grille. I just undid the screws.

---

Yep, some cars you can unscrew the centre bit, some you need to cut that bit out.

yeh you can unscrew the ej8 and facelifted ones but the pre-facelifted ones you can, but still wouldn't you need to saw the part where the honda badge is or do you guys just mesh right over it?

http://img210.imageshack.us/img210/3498/38835832lu5.jpg

Quote:

---

Originally Posted by CTR Coupe

you have to cut it out with a dremel tool.

---

yeh, Bodgy Racing Developments stated he didn't need to cut anything out to do hes