Exhaust sitting very low on DC5R is this normal?

Hey guys was wondering if this is correct the height of my exhaust and the way it sits... because im finding that my car height isnt that low and im still scraping on everything ... I wanted to go lower but cant cause my exhaust will probably ripp off.. If yous can tell me if this is normal with DC5R or my exhaust is fitted wrong... Im using the fujitsubo powergetter exhaust thanks!



PICS OF ACTUAL HEIGHT

http://www.intensedesigns.com.au/exhaust-pics/7.jpg

http://www.intensedesigns.com.au/exhaust-pics/6.jpg

EXHAUST PICS
http://www.intensedesigns.com.au/exhaust-pics/1.jpg

http://www.intensedesigns.com.au/exhaust-pics/2.jpg

http://www.intensedesigns.com.au/exhaust-pics/3.jpg

http://www.intensedesigns.com.au/exhaust-pics/4.jpg

http://www.intensedesigns.com.au/exhaust-pics/5.jpg

common issue with FGK, B-pipe hangs low.

^ yeah same my fren had the same exhaust n it hang tat low as well.

wow my rm01a doesnt hang that low, thats gna scrap quite abit :S

looks painfull

what cat are u using? stock? coz it lowers or increases the height of your catback depending on that header/cat your using too

all stock ... powergetter bolted straight on ... so this is normal? I can't go any lower then :(

Quote:

---

Originally Posted by obsessionz

all stock ... powergetter bolted straight on ... so this is normal? I can't go any lower then :(

---

Raise the exhaust - problem solved.

how can you raise it? is it even possible?

Quote:

---

Originally Posted by obsessionz

how can you raise it? is it even possible?

---

I dont know the particular exhaust or car, but may be as simple as lifting the hangers or you may need to cut the exhaust and insert a small piece of straight pipe or maybe even heating it up and bending it. Best way to know is to go to a good exhaust shop and put it on a lift and see what they say.

Yes - take it to a good exhaust shop. Expect a bit of cutting and welding of your brand exhaust though.

the rear hanger should be fine. theres no hangers from the rear to cat. your cat connection is what makes it go lower. looks like u may have to get the piping bent up