Printable View
hey guys
just out of curiosity, what type of motors do all the *quick* integras(dc2's)/civics run?
there's some people from another forum that think that they use a crv block (mentioned bel garage buildup)? i was under the influence that they'd be k20/k24's (they are definately NA running 13's down the quarter)
define "quick"
it is possible to run 13s with b18c and mods.
the b20 engine set up is showing alot of potential and is a better base to mod than the b18c
and the k20 or even better k20/24 is a beast of an engine and with mods can get u into high 12s
it really depends alot on the driver and the suspension set up
jus a quik question what would be quicker? :
b20 block with b18 head
or
k20 block with b18 head
???
i dun think u can k20 block wida b18 ..
a d and d can go toether
a b and b can go together
a k and k can go together
as far as i kno -
Thats the new craze!!Quote:
Originally Posted by Lex_EG93
stock k20 in a light shell with good sussy and tyres can do low 12's. Possibly even 11s.
b18/b20 setup 13.4xx in a dc2
wats the fastest NA (b18c2) dc2 vtir in australia then?
Is Crack Cheap in your area? heheQuote:
Originally Posted by Lex_EG93
if it is hook me up!!
hence i wrote "i think"
i just thought that only d same series fit each other - ill remember it now
my friends dc2r runs 13.19 with jdm b18c and lots of mods.. his username is dc2sparks
Jason (blackdc2) from this forums ran 12.9 with his Allmotor b18c DC2R
Badhbt Dc2 with stock jdm k20a ran 12.7