bulb sizes [FD + FN2R]

Hey,
just wonder what bulb sizes for the headlight do the normal civic use? and the civic sport foggies? and also what does the FN2R uses?

HB4 fog + low beam
HB3 high beam
for FD

dmx, have you had HID for your civic? I'm thinking of doing it myself without removing the front bumper.. I've been searching the forum for DIY guide for this, but I couldn't find one.. Do anyone know how?

isn't the normal bulb for FD, HB3, HB4 and H11 for foggies?

I've also been told that if I fit HID to my FD, it will void the warrenty, that's why I'm doing it. but correct me if I'm wrong~~

Quote:

---

Originally Posted by jckidz

dmx, have you had HID for your civic? I'm thinking of doing it myself without removing the front bumper.. I've been searching the forum for DIY guide for this, but I couldn't find one.. Do anyone know how?

---

You dont need to remove the front bumper at all.

you remove the screws from the splash gaurd where the wheels are and pull it back.
then you look up and you will be able to see the lights and you twist them and pull it out then place the hid bulb in there while some one helps you pull the cord for the ballast threw from the top of the engine bay.

fog lights are easy just pull hard on the black cover next to it. then unscrew the light and replace the bulb.

if you wanna know a bit more in detail just pm me.

correct bulb sizes are
Low beam - HB4
High beam - HB3
Parkers - W5
Fog Lights - H11

Quote:

---

Originally Posted by LD_Mart

You dont need to remove the front bumper at all.

correct bulb sizes are
Low beam - HB4
High beam - HB3
Parkers - W5
Fog Lights - H11

---

Thankyou!

Quote:

---

Originally Posted by jckidz

dmx, have you had HID for your civic? I'm thinking of doing it myself without removing the front bumper.. I've been searching the forum for DIY guide for this, but I couldn't find one.. Do anyone know how?

---

mine, i did remove the bumper to mount the balllast. but my fren, he just put around the radiator area (there is metal bar that u can use), and the cables close enough to reach the headlight. u can try this.

Quote:

---

Originally Posted by LD_Mart

You dont need to remove the front bumper at all.

you remove the screws from the splash gaurd where the wheels are and pull it back.
then you look up and you will be able to see the lights and you twist them and pull it out then place the hid bulb in there while some one helps you pull the cord for the ballast threw from the top of the engine bay.

fog lights are easy just pull hard on the black cover next to it. then unscrew the light and replace the bulb.

if you wanna know a bit more in detail just pm me.

correct bulb sizes are
Low beam - HB4
High beam - HB3
Parkers - W5
Fog Lights - H11

---

my mistakes, sleepy last night:), cheers

Thanks Ld_mart & DMX.. I'll try it out soon.. :D

Does HB4 = H4? HB3 = H3? Parkers = Watt5??

Thanks

The bulb sizes are not the same

http://www.velocitygetter.com/images/VGsize.jpg

HB4 = 9006
HB3 = 9005

Parkers are usually 10W. Most or all cars use T10

FN2R Lo beam is H7,

Quote:

---

Originally Posted by ahmondjai

isn't the normal bulb for FD, HB3, HB4 and H11 for foggies?

I've also been told that if I fit HID to my FD, it will void the warrenty, that's why I'm doing it. but correct me if I'm wrong~~

---

i would uninstall it before claiming the warranty, don't give a chance for them to avoid your warranty.