Install EK9 Front Sway to CXI?

hi guys

what do i need to install an ek9 front sway to my cxi? I got the swaybar, bushings, brackets, endlinks, and the ek9 front control arms.

Is that everything i need to bolt them on?

thanks.

Yes, thats all you need. Have a look at the CXI lower control arm to check if the hole for the endlink is there. If the hole is there, no need to use the EK9 lower control arms.

Quote:

---

Originally Posted by tank

Yes, thats all you need. Have a look at the CXI lower control arm to check if the hole for the endlink is there. If the hole is there, no need to use the EK9 lower control arms.

---

not 100% -

you need the 4 x 12mm headed bolts to hold the swaybar to the subframe :)
Its done btw :thumbsup:

ive got every part except those 4 bolts ><..u dont happen to know the exact size do u?

if your ek1 already came with stock swaybars you can use the bolts that came with it already.

Quote:

---

Originally Posted by Killa From Manila

ive got every part except those 4 bolts ><..u dont happen to know the exact size do u?

---

u mean the D bracket bolts? if ur car had a swaybar on it before just use those, otherwise as ben said the head size is 12mm, i think the thread size is 7mm, and the length of the whole bolt is 2.5cm

cheers. mine being a cxi, neva came with front/rear sway bars

umm...

isnt he talking about the front sway bar?

yes..and mine didnt come with a front swaybar. so i need to source them 4 bolts

Honda dealer will sell them, as will a wrecker if you specify. Hond ashould stock them, from memory the bolts are used elsewhere on the car.

Does it have a rear?

yeh the bolts are easy to come by.
if u mean does the cxi have a rear swaybar, no. the cxi didnt come with any swaybars.
if u mean are the rear swaybar bolts the same as front, yeh

This is the 26mm front sway, correct? You will also need the front strut forks from the EK9 or EM1. The EK9/EM1 front LCAs are of different design and you need the strut forks along with it.