hey guys, when i close my doors on my dc2, the dorr makes a rattling sound, i think its the glass, not too sure, n e 1 else have this problem?
Printable View
hey guys, when i close my doors on my dc2, the dorr makes a rattling sound, i think its the glass, not too sure, n e 1 else have this problem?
Does it rattle when your driving with the window is down?
If so you will have to replace the bally channel on the inside on the door.. if it rattles just from closing.. there is an article in www.team-integra.net that resolves it.. Or you can use some eletrical tape on the door catch (the U thing on the car) and the door doesnt rattle so much on closing.. that what i have done.. don't put too much on or your door doesn't open and close smoothly..
nah doesnt rattle while driving. just when you close the door. WHen i close the doors on my friends 200 and other cars, the sound is nice n solid, just a thump. but mine is like a weird rattling sound from the glass or sumfing.
N e ways JSL, fanx for the link and tape trick. i'll try it out!
ahh then the tape trick should work ok.. works for me :)Quote:
Originally Posted by faijai
this happens a bit with Integra's, sometimes the door lock comes loose or the door strike, also the rods that go to the door handle hit the door body if there not seated into there holding clips correctly. also the window can rattle in its channels. pull your door trim off and have a look, also do a search as some one had a similar question not that long ago.
my windows rattle...
im too afraid to take the door lining off to fix and tape and tighten stuff behind there.
i dunno why...
ive taken my whole car apart with no tools or anything, and not knowing what im doing.... bah lol dunno why door trim is soo scary for me.
Ooh thanx ecu man. my bad for not doing a search. hehe
fried - yeh sumtimes i get scared to pull my car apart too. not just the door but everyhting. but i guess gotta lern to do sum stuff one day!
Could you explain to me which part is this ?Quote:
Originally Posted by JSL
the bally channel is the channel your window is seated in at either side. usually the guide comes out and causes the window to become loose in the channel.
theres a rubber insert thing... it sometimes comes loose and comes off
a new one is around $35 honda
Ohhh icic.. thnx ECU MAN & FANATK
i'll go check it out tonight :D
Fanatk: where did u get your rubber insert from???