Spoon Caliper,, Rota slipstreem wheel

Does anyone know if the Rota slipsteem wheel in 15" or 16" fits on a dc2 vtir (4 x 100) with spoon calipers WITHOUT A SPACER. Considering purchace want to get the right wheel. From my reserch these wheels have a 40 offset

no they do not

hmmm 15s deffinately not... 16s could be a maybe?

paul had 16" rotas with bigbrake willwoods... much bigger the spoons

is there any one else that has experience with 16 rotas wheels,,, will they fit or not. Would realy like someone who has them or has tried to fit them

if your in brissi i have sum 16 inch rotas sitting around waiting to go on my ride. if you have the brakes on and wanna do a trial fit you can pm me. (paul did have rotas with willwoods which are bigger but they were spaced with a 5mm spacer.)

im in Melbourne ,,thanks for that

Those spoon calipers won't fit DC2 hubs without some slight modification.

If you had 5stud then straight bolt on. For 15' wheels you need at least 15x7 +35 offset to clear spoon calipers without spacers. You can use 15x6.5' +38 or +40 with a 8mmspacer and it'll clear it. It also comes down to rim design.

You'll need a minimum 3mm spacer.
Also depends on the type of wheel and the way it was designed.

My rims atm are 15x6.5 +35 and they clear the calipers.

Quote:

---

Originally Posted by Q_ball

You'll need a minimum 3mm spacer.
Also depends on the type of wheel and the way it was designed.

My rims atm are 15x6.5 +35 and they clear the calipers.

---

Are your wheels 4 or 5 stud if they are 4 stud what brand are they

Theyre 4x100 - type, not sure...

doesn't the spoon fit run 15" rims with spoon calipers...?
dunno if the calipers are the same size though...

http://www.tempetyres.com.au/product...t=&part_no=140
star corp racing lite 5 .....15x 6.5 40 off set any one tried these to fit with spoon calipers.... looks like good clearance