engineering engine conversion

Hi,

Looking at places that you went to get your engine conversion engineered in NSW?

Any recommendations on a particaluar place to go to?

Thanks

here is a list of all teh engineering signatories in NSW

https://www.rta.nsw.gov.au/registrat..._july_2008.pdf

maybe we can sticky the link

thanks for the input trism - got that list already.

was wanting to see where most people end up going to get there conversion engineered at?

what engine is in your car ?

as long as its from the same age or newer chassis , and is within 15 % capacity increase there is NO need to get it engineered. You only need to re assign the new engine number to your car , with an "adjustment of records" from the RTA. $32 or so.
easy.

engine going from d16 to b18c, so will need engineers certificate.

any recommended places that you know of to go to?

thanks

1.6 + 15% = 1.84

you only need to adjust records. no engineering needed.

Quote:

---

Originally Posted by EG

engine going from d16 to b18c, so will need engineers certificate.

any recommended places that you know of to go to?

thanks

---

no you don't because its based on the biggest available for the chassis which is the B16a for the EG6... they calculate off cc so from 1595cc to maximum 1834cc... just enough to get you an lsvtec B18b block too if you wanted

Quote:

---

Originally Posted by dsp26

just enough to get you an lsvtec B18b block too if you wanted

---

:thumbsup::thumbsup::thumbsup: i like your thinking!