How did your car run with the tps gone?
Printable View
How did your car run with the tps gone?
Dun worry,I just found my answer:
http://www.youtube.com/watch?v=JGAJ7w2OJrg
Yes,the tps is rooted.
Does TB gasket need to be replaced when doing this job?
if its not ripped or nething u can reuse, otherwise yesQuote:
Originally Posted by Mikecivic78
Thanks. Any idea on cost of gasket?Quote:
Originally Posted by stevo716
eh 5 bucks if thatQuote:
Originally Posted by Mikecivic78
Cheap AsQuote:
Originally Posted by stevo716
Cheers mate
yeh paper gaskets are cheapQuote:
Originally Posted by Mikecivic78
The problem was the wires were mixed up,the map sensor and tps sensor wires were around the wrong way.Quote:
Originally Posted by beeza
As steve said.I rang Honda yesterday and they dont sell tps gaskets cause the tps is riveted on and therefore will never be seen..Quote:
Originally Posted by Mikecivic78
I'm really stoked this thread is getting views it deserves..not for the work i did but for the benefits this yields..hope Ya'll do it and the other DIY,modifying the TB for more airflow!
Sorry for this being my 1st post been browsing and seen this post,
Recently my ECL came on with code 7 which was TPS replaced this but I can't seem to get the volts setting right on close it's reading 0.50v and on full throttle it reads 5.34v how do I go and set this up, am running 70mm Blox throttle body which I have not had any problems with previous TPS sensor
Dont no if am doing something wrong
Thanks for your help
try to adjust for WOT first then tweak for a closed throttle
if you check a few posts back of mine I actually list a range, just as long as you're between there you should be right