Printable View
yes, asr is just a name. But we just call it that coz so common. umm sorry cant find it myself, most likely discontinued? Or you could give them a call. ASR looks better anyway and more readily available than whiteline kits. There's also CT-Engineering ones but they are hard to source over here.
cool cheers... the reason i asked about the whiteline ones is that i know i can get their parts for cheaper. hopefully i can locate a sub frame reinforcement too!
cheers for the help mate
i need some answers, gona be installing a 24mm rear whiteline sway soon, but im also thinkin of upgrading the front sway bar in order to reduce more further unhealthy roll.
is there acutally aftermarket front sway bars for dc2's ( a production from whiteline) or am i better off jus upgrading the endlinks and the bushings with the stock front sway bar.
no prelude love
Thats what I was thinking.
MWAKU, we get all the love we need over at PA.
But, when I saw this thread I did think to get the measurements off my old stock sway bar, but I dont have calipers :S
umm lol get a string and wrap it around then get that length measured divide by Pi. Then that will be the diameter. If your really keen that's a way.
Or get a few open ended spanners and use them to check the diameter.Quote:
Originally Posted by RtN
Or get a shifter, adjust it to the diameter then measure it with a ruler.
Cheers
Gary
^^shifter idea -> spot on!
Added ED9 and EF8 CRXQuote:
Originally Posted by wynode
quick question as this is kind of the same genre...strut bars...dc5 type r...front rear and middle....where the eff does the rear and middle bolt onto..rear is obviously on the sussy but il have to have a good look 1 day but middle :S?
Quote:
Originally Posted by wynode
Added EK1 GLi front only 22mm
EK1 CXi none
EK4 VTi-R front 22mm rear 14mm
does and 1 know stock size front and rear for DC5R?