What were the alignment readouts?
Printable View
What were the alignment readouts?
if a set of falken RT 215 is made in 2003
are they still ok for use?? 120 each.
any recommend for 14' ???
Quote:
Originally Posted by yuentinlon
The short answer is 'no'. Most street tyres expire after 5 years.
so i shouldnt buy them .... right ???Quote:
Originally Posted by tank
>.<
he said it here, plain and simpleQuote:
Originally Posted by tank
I've had some sitting in the garage as of recently, is there any way to help preserve them even a little to stop them going hard? eg. vacuum sealed in plastic.Quote:
Originally Posted by tank
Agreed, they harden up and become brittle with less grip too.
so ... where can i buy a good perfromence tyres for 14'
and about 100 - 140 each .....
i feel really sad about that coz i used a lot of time to ask all
tyres dealer about 14' tyres... may be really expensive or may be not good
enough ....
14"? You can get RE001 for $100. Pretty good.
you sure @@? i am in brisbane , where can i find them ??@@Quote:
Originally Posted by aaronng
Don't get anything narrower than 185 width in 14 inch.Quote:
Originally Posted by yuentinlon
Try Yokohama C-Drive. The MX5 crowd have good experiences with this tyre.
Otherwise, you'll have to up your budget and get the Falken RT615. Get the 195/60/14.
but why i cant get 175 ???? for what reason ??Quote:
Originally Posted by tank
coz i am using 185 ... is that a big troble???