[CL9] weapon r header

Quote:

---

Originally Posted by ChaosMaster

So wait, Toda, WPR and PLM will all require either work to the subframe or a cut/new CAT?

---

not sure about the subframe.... thats more J's

WPR/PLM both needs cut/weld to fit a car
but PLM will need an extra cut/weld to the factory catback (cause it's much longer than WPR)

Quote:

---

Originally Posted by ChaosMaster

So wait, Toda, WPR and PLM will all require either work to the subframe or a cut/new CAT?

---

dont think you need to do anything to the subframe but you will need to get a new cat because toda and wpr come with a test pipe
but not sure about plm what you can do take ur test pipe to an exhaust shop they can cut it in half and weld on a cat for you
to fit

Gah, means more in Labour cost I guess. Thanks for the info guys.

Damn, the Toda looks expensive. For head and Cat. How noisy are they though? I don't want something noisy at idle or low down. I do want improved low down power though, the K24 is really lacking.

Quote:

---

Originally Posted by ChaosMaster

Damn, the Toda looks expensive. For head and Cat. How noisy are they though? I don't want something noisy at idle or low down. I do want improved low down power though, the K24 is really lacking.

---

If you keep the factory catback and dont go crazy on the high flow cat, it's not noise at all, stock like in fact.

Quote:

---

Originally Posted by Fredoops

If you keep the factory catback and dont go crazy on the high flow cat, it's not noise at all, stock like in fact.

---

But then would I still get any gains?

Quote:

---

Originally Posted by ChaosMaster

But then would I still get any gains?

---

As a reference, I have a 250 cel cat.

And it's really quiet. Like stock.

Hope this helps.

Hey Fred I need ur opinion on feels header..does it require work like wpn r?? Weld on to a test pipe or...

Feels header is like MaxiamWorks header.

BLOOOODDYYYY AWSOME.
BLOOOODDYYYY Expansive

Hi guys,

I have a facelift CL9 ,2007 and I'm interested in changing the headers as well.

I can go cat-less I don't mind, but I'm looking for a quite setup, I'll have the Hondata ECU reflash, Comptech Icebox intake and stock catback.
I'm just looking for some good headers not so expensive like Toda are, but to be quiet.

For what I could read here the PLM and WR are both cat-less which is fine, I just want to know which will be ok for what I want .
Our should I look for something else ?

what is the diameter of the test pipe on the weapon r.. ? just adding up the cost of the potential install.. Magnaflow flow cat 170 + weapon r header 600 + welding $200.. its a grand..

Quote:

---

Originally Posted by euro1603

what is the diameter of the test pipe on the weapon r.. ? just adding up the cost of the potential install.. Magnaflow flow cat 170 + weapon r header 600 + welding $200.. its a grand..

---

There's a few people selling second hand WPR setups, have a look at our trade section and firesport