yellow s2k

Supercheap, $5 or so.

Quote:

---

Originally Posted by ludecrs

Supercheap, $5 or so.

---

thanks. hope the stupid thing doesn't scratch the paint... should I stick some cotton wool to the back?

foam is usually a good idea, one thats got glue residue on one side. This way the foam "wears" into place to find its own even level over any bumps and what not without damaging paintwork.

Any rubber store will have some - Clark Foam & Rubber etc.

Quote:

---

Originally Posted by ludecrs

foam is usually a good idea, one thats got glue residue on one side. This way the foam "wears" into place to find its own even level over any bumps and what not without damaging paintwork.

Any rubber store will have some - Clark Foam & Rubber etc.

---

awesome, thanks for your help mate :)

Quote:

---

Originally Posted by euromandeluxe

so how'd you end up putting your p-plate up on the rear? next to the number plate?

if you did, howd you stick it there? im going to pick up the S tomorrow (:D:D) but i want to know how to stick up the damn rear p-plate so i can drive home top down !

do i need to get one of these things?

http://i297.photobucket.com/albums/m...w_05/Lp002.jpg

if so, where from? any servo, or do i have to go to supershit auto or somewhere else similar...

thanks

---

Dude put a round hole in your p plates (on the corners) get a nut and a bolt put the bolt through the number plate (theres many holes on most number plates) and put the nut on the back of it. Use one bolt for the top corner and one for the bottom corner and use one nut for each to keep it in place so it doesnt fall off the number plate. Dont waste your money on ugly things like that p plate holder lol.

If you cant work that out go buy those shitty magnet p plates (which fly off so be careful)

Quote:

---

Originally Posted by F20C

Dude put a round hole in your p plates (on the corners) get a nut and a bolt put the bolt through the number plate (theres many holes on most number plates) and put the nut on the back of it. Use one bolt for the top corner and one for the bottom corner and use one nut for each to keep it in place so it doesnt fall off the number plate. Dont waste your money on ugly things like that p plate holder lol.

If you cant work that out go buy those shitty magnet p plates (which fly off so be careful)

---

hey,

dont really like the idea of the magnetic ones - theres heaps of stories of them damaging the paint work if they get left on for too long, especially if small dust bits get caught between the plate and the paint.

i was thinking of doing what you said with the nuts and the bolts. think ill try it. hope theres no number plate cover that might make things annoying

remove the number plate cover.. i never had a problem with mine on the rear and using the nuts and bolts! GOODLUCK!

Quote:

---

Originally Posted by F20C

remove the number plate cover.. i never had a problem with mine on the rear and using the nuts and bolts! GOODLUCK!

---

ahah, there was no cover, and those screw holes at the very edge of the number plate were what was being used to hold it to thr car, so I just unscrewed two, put the p-plate in between, and screwed it back on. too easy!!

Thanks for the help :)

No worries dude glad it worked!! no cruise around with that top off lol.

Brought my baby home yesterday! can't believe how nice they are to drive :)

how awesome is the feeling! top down on a warm summers night is the BEST.

too bad I'm not going to be able to drive my S anymore until my euro is sold...

Quote:

---

Originally Posted by euromandeluxe

how awesome is the feeling! top down on a warm summers night is the BEST.

too bad I'm not going to be able to drive my S anymore until my euro is sold...

---

how come?