do the vti have the same lug nuts as the vti-l and sport?
Printable View
do the vti have the same lug nuts as the vti-l and sport?
Any suspension do you guys suggest? Not too low
I plan to change buddy club 17" rims later...
Yes, lug nuts are all the same for the Civic Vti, Vti-L & Sport (FD1/FD2).Quote:
Originally Posted by Stig
Honda Civic Sport Modulo review by Carsales - http://www.carsales.com.au/reviews/2...t-modulo-22041
oo i see they have the HPF rims on
that's getting very close to type r moneyQuote:
Price Guide (recommended price before statutory and delivery charges): $32,290
Options fitted to test car (not included in above price): $3925 for Modulo parts)
wad? that's still 10k difference!
anyway the bodykit really makes the car stand out, compared to the prefacelift FD's anyway
Tim i'll get to your photochp when i get a sec.
its only $3.8k away from an fn2r
are kumho ku31s decent tyres? as in.... not noisy or anything?
Apparently theyre a bit noisy and last around 20,000km from reviews. However, theyre bang for the buck and the reviews show decent grip, even in the wet. Grip and price is the upside, wear and noise is downside IMO from the reviews. Im gonna fetch some when i can.Quote:
Originally Posted by black8thgen
they wear better than the ku36s lol. and like ekay1 said; great bang for buck, which is why i got em. road noise isnt that big of a deal. i used to have a set of cheapo maxxis tyres on my old wheels which were awfully loud. compared to them the ku31s do well.
ive had ku31 on my 19's, not a fan, annoyed the crap outta me due to road noise
Bridgestone RE001's or Falken ZE912's are also decent tyres you could consider.
I've got ZE912's and they're pretty good in terms of grip, noise and price.
Hmmm. Falken 452s or kumho ku31?
452 imo
how are they for grip in the wet?
just out of interest.....
has anyone timed there 0-100 after a few breathing mods??
fk452s are much better than the ku31s, but do cost extra.
anyone changed their reverse light?? kinda weak..
I did. Changed to LED. It was actualy worse than stock lol
got my engine
Quote:
Originally Posted by black8thgen
$400-450 per wheel to $180-200 per wheel.. you get what you pay for.
perhaps that price is applicable to larger sizes, but catalogue here had the fk452s in 215/40/17 for $250-$300/ tyre @ bob jane a couple months ago.
ask around, black8thgen. u'll prob find some good deals especially if u got good connections.
I got quoted 170 for f452 today...... 160 for ku31
8th gen, the more you pay, the better quaity you will generally get lol Maybe you should make a budget.Quote:
Originally Posted by eNGee
Great price for the falkens! I'll get a set of them after the ku31s wear out if I can find them up here at around that priceQuote:
Originally Posted by black8thgen
Oooo... I need to get some new tyres too.Quote:
Originally Posted by black8thgen
Where'd you get that quote from? :)
i vouch for 452's. quiet and nice aggressive looking pattern ;)
It's probably a bit much IMO.
http://i128.photobucket.com/albums/p...-1copycopy.jpg
yeah.... slightly over done. Not too sure about the mirror lol
I want a modulo lip now lol
door handles and mirrors are a bit too much. just the chrome strip and vtec sticker in orange looks good
So I was in Thailand =D
http://img185.imageshack.us/img185/6605/img1477x.jpg
http://img408.imageshack.us/img408/5213/img1490t.jpg
:thumbsup: ?
LOL NICE!! what kit??
i cannot believe you actually managed to bring that back on the plane LOL
wow wtf is that LOL
lol that's hilarious!
btw guys i went for some track driving today... It's hard lol! oh and i got heaps of liftoff oversteer too! was fun. Now i need some coilys, swaybarrs, new wheels/tyres and a set of brembos.
Should set me straight.
ey is that allowed ?? thinking of buying a kit as well overseas and bring it personally...
considering you can bring ski's/snowboards/surfboards...
it should be ok, you might have to pay a little extra for several pieces of 'oversize' luggage but weight-wise it shouldn't be a problem.
only thing is... you gotta hope it doesn't get crushed or lost :/
^
http://img213.imageshack.us/img213/4224/img1492e.jpg
What howy said...
Pro Tip: individually wrap the pieces, the two side skirts were stacked up on each other without being individually wrapped. Good thing its on the under underside of the skirt.
Its not a Type R, Mugen, or Modulo kit. I'll give you guys more info once I get it painted and fitted and a few :thumbsup::thumbsup::thumbsup:. Dont want to get too excited yet.
It was pretty crap getting it through customs, they were being difficult, despite me having all the receipts and being cooperative. Had to fork out even more $$$ after all that I had to deal with in getting it here.
As for weight. I had it all planned out. Why do you think I only have a small duffle bag on my cart? Sacrifices were made.
thats funny as :D
try walking through with 4 wheels haha
ings+1?
You went to barbagallo today? :PQuote:
Originally Posted by curtis265
anyone interested in my HID kit?
what u planning to do when u sell it? btw u selling ur modulo lip?
ssllyy, we'll be looking forward to seeing your kit. What material's it made of?
chan, i went to AHG skidpan and went on that little track there. Great fun it was
Curtis, what mods you got on the car? Man i wanna track the car but so pricey lol. INGS +1........? for real? genuine??
Any one interested with my civic LOL
What makes you say that? =DQuote:
Originally Posted by Stig
Replica for sure. Its made from FG.
Just had a friend come over and give me a bit of advice. It copped a bit of bumps on the way in, so it needs a bit of work. Still a bit rough, but atleast it lines up pretty well. He says, it'll take a bit of work, but its doable, though he wouldnt want to spend time on it. Good thing I enjoy doing this stuff.
I'm gonna DIY the filling and sanding parts. Then I'll provably do the prime myself before shooting it off to the panel beaters to have it painted and baked. Might take me a few months to do it properly, i.e. with mounting and taking off, and measuring over and over again to get the lines and gaps done properly.
ahh FG :( oh well, goodluck with that.
ekay, i'm a stocke except for different tyres (RE001)
lol. Just really want to go mess around and see what it could do really.
and if i wanted it to be a track car, it needs a lot of work - handles like a booat in stock form, rofling all over the place around corners.. I thinik the driver needed more exp too, i rkn i can't drive for shit - it's v. different too video games
19's or 20's?
Getting another set already, dez? I say 19s.
yeah lol.. maybe vip modular's, talking to the warehouse atm..
they really nice, and wanna get the wheel perfect for your car etc..
they asked me for future plans etc.. like BBK and all, real customer service!!
anyhow, i got this done today.. rather depressed, but happy at the same time
man i thought i was cool with -4 or higher camber.. im just a pussy with -3.3 LOL ={
http://img28.imageshack.us/img28/4682/img0146di.jpg
Ahh.. maybe we could arrange to go together for the next skidpan :D Can't wait to try out the FN2 there heheQuote:
Originally Posted by curtis265
hmm i really should get a wheel alignment, done 32k km, gone through like 10-12 sets of rims, 4 sets of suspension and never got a wheel alignment... LOL
LOL. Are u serious.... I think mine is a bit off after just one change of suspension =.=..
car is still going straight so don't touch it if ant broke haha
your tire wear and tear might be uneven though.. IF you kept them on for longer then 1000 km's hah :D
18x8 +38 18x9 +35 Matt gold ce28s or work 11r in white 18x8.5 +38?? helpp!!
ce28s man! volk > work for me
anyone wanna buy my white fd2 rims?
I'll go 11r in 18x8.5+(25-30) cos hardly anyone has the rims yet
Agree with stig
they look shit from a face up view LOL=[
Hey guys I've been moding my car with minor mods lol I've been reading this thread for a while now so here goes:
Mugen sports pedals replicas
Led door sills
Remote trunk realease
Smd festoon Led dome lights
Led side markers
Led reverse lights
Led license plate lights
R8 style projector headlights
Carbon fibre hood ( courtesy of liquid who sold it to me)
Chrome projector fog lights (on the way)
Auto fold side mirrors with led puddle lights and markers (on the way)
Future mod mugen rr style rear number and mugen 1 front and sides.
Oh and also engine start button! Lol
I'll post the pics up soon but I'm embarrassed cuz I still got no shoes on lol
And just wondering where can I get a harness for my engine start button anyones know?
Hey guys, does anyone know if the fd has any natural camber, even a slight camber lol. I want to put spacers as the specs of the rims are so weak, but was wondering if itll show any signs of ANY camber or if its 0. Cheers
rear has a bit. don't know exactly, but there's definitely some
stock, front is a bit positive and rear is a bit negative
Why u selling yo?
got a new pair....hehe
=O! what brand? they much better?
I use 55w, and the light output is so much better!
Only downside is the glare. - Should be sorted when I move to projectors
F****RS!stole all 4 of my valve caps off my Rims!
any one knows where i can get em again??4 of the blue anodized rays ones
WTF!
lol now you know how i felt when they stole 4 of my blue work ones and 4 of my work chrome ones
eBay sells them. Lol no ones stolen my white ones yet =]. Bl tim.... That shit always happens =[..
Wow thats shit. Someone stole my fake mugen sticker on my spoiler. Left a dirty mark from the tape lol =\
why would anyone do that?
did u get a replacement henry?
ryan, where abouts in ebay?
yeah got 4 new blue work ones at $20ea cos you had to buy the whole valvestem and 4 new work chrome ones at $10ea, keeping my chrome work ones in the house and just running the mcguard chrome ones, only putting them on for special events :)
ask leo at jdmconcept, he might help you out cos thats where i got mine from
found em, fark!
50 bux!