EP3 Type R

Printable View

04-06-2013, 04:52 PM
Perry

Quote:

Originally Posted by chargeR

Clearance varies with the sway bars I think, ie. the Whiteline swaybar on Australian DC5R will clear most JDM headers when set on full stiff, and would most likely be the same on EP3. But to be assured of fitment though you'd need to run an Australian or US spec header, either OEM or aftermarket. Stuff like Skunk2, SSR, ASP will fit with the Australian DC5R front sway bar.

Thanks ChargeR PM sent about this matter =)
04-06-2013, 08:40 PM
flop101

Quote:

Originally Posted by EKVTIR-T

not really

even high power you still want more

r35 for example

Would you get over an ep3r quicker then a dc5r?
04-06-2013, 10:38 PM
LD_Mart

Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.
04-06-2013, 11:28 PM
Perry

Quote:

Originally Posted by LD_Mart

Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.

I'll say Dedy at Top one or Hanny's.
05-06-2013, 02:50 AM
DreadAngel

Quote:

Originally Posted by flop101

Would you get over an ep3r quicker then a dc5r?

Subjective, but the time is usually the same for all cars...

It's also highly dependent on the person and type of driver/owner you are... If you're simply after the adrenalin of going fast and being pushed into the back of your seat in a straight line then you'll definitely get bored of any car quick.

Quote:

Originally Posted by LD_Mart

Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.

IXA Battle Garage, they're in Thornleigh =)
05-06-2013, 01:27 PM
UNA91

Got myself since new wheels! and a Mugen Wing is coming soon!
05-06-2013, 02:14 PM
butterfingers

Quote:

Originally Posted by una91

got myself since new wheels! And a mugen wing is coming soon!

hey fk you bro whered you get the wing?!
Lol
05-06-2013, 02:20 PM
UNA91

It's a replica, fibreglass haha its from an eBay seller called Salla400, about 450 including shipping. Apparently their fitment is pretty good, and has sold a few . The people on other forums say its a decent fit.
05-06-2013, 04:05 PM
bennjamin

Quote:

Originally Posted by LD_Mart

Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.

Major is all fluids and the timing chain tensioner -

Grab all the stuff and come to me at Giraween la cheap and sexy !
05-06-2013, 09:23 PM
DreadAngel

Quote:

Originally Posted by bennjamin

Major is all fluids and the timing chain tensioner -

Grab all the stuff and come to me at Giraween la cheap and sexy !

I forgot this sexy man XD

Rate highly too =P

And the DIY service XD
06-06-2013, 03:52 PM
LD_Mart

Quote:

Originally Posted by bennjamin

Major is all fluids and the timing chain tensioner -

Grab all the stuff and come to me at Giraween la cheap and sexy !

I PMd you a couple of weeks ago but never got a reply :(
06-06-2013, 05:45 PM
CivicRacer13

2 Attachment(s)

Hey guys just wondering if any of use have taken you EP3 down the 1/4 mile,what times are use running ? I took mine lastnight and lined my father up in his MPS 3 a few times but he couldnt launch it running low 14's lastnight but his best is a 13.7, my best time was my last run 14.093 is that any good ?? Mods :Gruppe M intake
Nitto Invo Tires 225/45R17 ran at 20PSI

Attachment 24934
Attachment 24933