Dedicated DA9 Q & A thread

Quote:

---

Originally Posted by A-man

.... mmmm im gettin shitty coz sometimes when the weathers hot the car wont start its either the fuel relay or the fuel pump i duno which but

---

definitely the fuel relay... just resolder it
if you desperate when it doesnt start in summer.. just reach under and give it a bit of a tap.. but this will only work for so long (as i discovered)

for the record.. my b18a survived a timing belt snap and 340,000kms, i didnt even blow the engine but just changed it with a b16a coz i got bored. during that time i also chipped it with a $5 ebay chipped which allowed me to rev to 8000 (i did this regularly). didnt do anything or make the car go faster.. just revved the shit out of it lol

so its just under the steering collumn

i have just bought a hyperrev or hyperspeed or somethin book for parts on da9s its a bible, also for dc2s etc. if anyones chasing parts when it gets here give me a hoy and ill give u the part numbers for it


i have just removed the clutch with dad and we got it out in 3 hrs.....

anyone else want to beat it be my guess :P

nice aman...i would never be bothered with stuff like that...too lazy...

btw..anyone know if someone in australia have done a 5 stud conversion for their DA yet?!?!?

are the front of the JDM DA integras same as AUDM. If i want to use front end parts from a JDM DA, will i be able to?

what parts??? most of them r alrite... i dont c y u wouldnt be able to


check this out u can dl a pdf of the da integras

http://www.spoonhonda.com/downloads.htm

I had that same problem.. my dad rekons its the one of the terminals..

I discovered that i forgot to tighten one ^^ lmao

i sold my integra today :(

http://i220.photobucket.com/albums/d...an%20DA9/3.jpg

bye bye car :(

Quote:

---

Originally Posted by weezer

are the front of the JDM DA integras same as AUDM. If i want to use front end parts from a JDM DA, will i be able to?

---

to my knowlegde the only difference in the front are...obviously the engine..and front cross member...all other parts are the same

the parts aren't "the same", but they should bolt up fine. the fenders have thin side moldings, and bumpers have amber indicators, etc some other stuff.

Quote:

---

Originally Posted by weezer

are the front of the JDM DA integras same as AUDM. If i want to use front end parts from a JDM DA, will i be able to?

---

My car is an AU with a 4 door jap front on it, ****ing lieing wreckers.

From memory the differences are
Foglights instead of second high beam.
aerial in bumper
different thermo fans and mounting brackets
radiator has different size hoses (smaller)
headlights have different plugs

Thats all I can remember at the moment, I haven't had any heating problems with mine despite the worse radiator and thermos. The yellow foglight cover thingo can be removed easily buy using a heat gun to melt the glue and taking the lense off.

CF
How much did you end up getting for your DA? Whats next on your plans?

thats not an ariel in the bumper thats a parking pole lol

and they were sorta rare. i have one!!! not hooked up though, pointless stuff