EP3 Type R

And u ran a 13.9 on your last run as well..? And all u got is intake right? Good stuff

Quote:

---

Originally Posted by doosra

And u ran a 13.9 on your last run as well..? And all u got is intake right? Good stuff

---

Yeah was pretty happy to crack the 13.9s on my last run :) yeah just the intake mate :) stripped some weight too weighed 1268kg with me in it

what did u remove?

Quote:

---

Originally Posted by u mad?

what did u remove?

---

Rear cushion = to run the racing harnesses haven't had time to put bak in
Sub/amp
Spare tire
And the boot carpet

Quote:

---

Originally Posted by anton1o

Ahh nah just TD06 20G, with full built engine and E85.. Very doable just need to stretch it out.. Its mainly a chase for big revs and power with a responsive graph over the chase for a dyno figure!
Well id say the DD would make it also, but it also comes down to test cars.. So most likely the 1st Y34 that was brought into aus was chosen to be turbo cause it will sell easier than non turbo atleast.

Yeahhh thats true, i know a friend has his slash plate taken off him and had to go the office to sort it out cause he was coming back from a drift day and the car was railed and the skirts were sometimes hitting the ground =[
Still they do have alot more flexability and police are generally nice enough to understand if the car is 'safe' then however it looks is fine.. I still think cut and shut suspension arms to achieve -20 camber is a bit crazy..

---

Oni Camber!!!

Need some clarification bogs

I plan to lower with coilovers around 2" with only natural camber, no camber bolts and want to be able to zero toe. Looking at purchasing a pair of Todd's tie rods. Is this used in combination with inverted tie rod ends or do I just use the stock tie rod ends? I'm assuming with stock tie rod ends, the tie rods will still sit angled and put strain on the steering rack.

Forget about roll centre adjusters? this shit doing my head in. dreadangel pls

Todd's tie rods and a rack relocation bracket is all you need. I will chase up what brand the rack bracket is

Quote:

---

Originally Posted by stndrd

Todd's tie rods and a rack relocation bracket is all you need. I will chase up what brand the rack bracket is

---

Are you referring to Akon (spelling) bracket?

There was a guy from clubrsx who was making the steering brackets, 0857 was his username. You can try emailing him: dc5jdm@yahoo.com. I was gonna buy one 2 years ago but was a bit skeptical back then whether the effects could justify the price for just a metal bracket. Tegiwa also makes one i believe.

Just wondering if anyone on here has sold an EP3 and whats the average time it takes to sell one.
Ive had literally no interest in my one, had a 2 calls and a few texts but only one real person come inspect it.
Is there a lack of interest for EP3's now?
Mine is in such good condition, reasonable KM's, Serviced, reasonable priced, all the right things.
Just weird that i dont even get any phone calls

Quote:

---

Originally Posted by LD_Mart

Just wondering if anyone on here has sold an EP3 and whats the average time it takes to sell one.
Ive had literally no interest in my one, had a 2 calls and a few texts but only one real person come inspect it.
Is there a lack of interest for EP3's now?
Mine is in such good condition, reasonable KM's, Serviced, reasonable priced, all the right things.
Just weird that i dont even get any phone calls

---

How much are you selling it?
Maybe your selling at the wrong time unless its priced similar to dc5r's?

Quote:

---

Originally Posted by Perry

How much are you selling it?
Maybe your selling at the wrong time unless its priced similar to dc5r's?

---

15,990ono
yeh probs just a hard time to sell a car, its a pretty specific market but was hoping to have more interest in it.
Theres only 3 cheaper in sydney and one has no air con, the other 2 have more kms and are only 15,500