WTF, who did your alignment?
Firstly, they can't find your car.
Secondly your toe is off, your camber at the front is un even
Printable View
WTF, who did your alignment?
Firstly, they can't find your car.
Secondly your toe is off, your camber at the front is un even
Shouldn't camber be less negative on the drivers side compared to the passenger at the front?
Seems to be opposite. :/
Who did that alignment? Lol
With the camber plates, they should of got the even camber settings.
epvtir
Even camber settings only ideal when they do the alignment with a person in the drivers seat.
Usually the front drivers wheel has less camber than the passenger, to account for the weight in drivers seat.
Once you sit in car camber should be almost even.
But hes got more camber on the drivers side compared to the left side. So I'm a bit confused..
God damn.. Seems they did a shit job aye. Can u guys tell me what I should be looking for then? Might go back or go to someone else...
Here are my old results with the RPF1s 17*9+22 and + 35
https://fbcdn-sphotos-c-a.akamaihd.n...18453743_n.jpg
17 x 7 +24 and kumho ku31 215/45/17
My older settings for my 17*7+30 and 215/40/17 were:
Height: Saggy Tein S-Tech Springs (Slammed)
Front Camber: -1.5
Front Toe: +0.21
Rear Camber: -3 (not ideal, I reckon -2.5 was enough)
Rear Toe: +0.5
Rear bumper remained unmolested until i got the 9 inch wheels in