EP3 Type R

RPS.13 I saw your car yesterday in the city near Lygon street, looking mint!

Quote:

---

Originally Posted by viett

RPS.13 I saw your car yesterday in the city near Lygon street, looking mint!

---

Thanks viett!

Quote:

---

Originally Posted by RPS.13

Thanks viett!

---

just curious what's the reason for the switch to ep from 180sx

Quote:

---

Originally Posted by integraR

just curious what's the reason for the switch to ep from 180sx

---

I was sick of getting defected in the 180, plus it was getting a bit dated.

Quote:

---

Originally Posted by RPS.13

Anytime Azz86. A long time reader :thumbsup: nice!

I'd also try dialling some more front camber, if you are able to for your next outting. If your camber tops are aready maxed out, you could look into camber bolts. Bearing in mind your stock tie rods will run out of adjustment the more negative you go.

I'd also change the front toe setting to run slight toe out, rather then toe in.

---

Thanks again for your help. I'll make some adjustments soon. Replacing the radiator this weekend. The damn thing cracked somehow....

I checked the tie rods and they aren't stock so should be right with adjustments. The camber tops are roughly in the centre so should be able to adjust that as well.

has anyone fitted oem foglights with the mugen lip on? heard you have to cut either the lip or the foglight housing dunno which i should cut haha

Hey everyone. So I just did a service and noticed that the new Honda FEO "ultra" is labeled API SM and the older FEO is labelled API SL.

Are they compatible? I've used the whole ultra bottle and was wondering if it's safe to refill with the original FEO.http://img.tapatalk.com/d/14/08/03/6y4e9ymu.jpg

SM has added additives to decrease wear and replaces SL

Quote:

---

Originally Posted by UNA91

SM has added additives to decrease wear and replaces SL

---

Thanks, mate. So it'll be safe to use the SL for top ups? There's still 3 litres or so and I don't really want to throw it out.

http://img.tapatalk.com/d/14/08/03/ytumyja5.jpg

Anyone know if this ecu is the right Kpro v3 for the ep3?

I'm guessing it at cause the price is so cheap to what they sell for in Oz

Quote:

---

Originally Posted by doosra

http://img.tapatalk.com/d/14/08/03/ytumyja5.jpg

Anyone know if this ecu is the right Kpro v3 for the ep3?

I'm guessing it at cause the price is so cheap to what they sell for in Oz

---

"customer supplied ECU"
it doesnt include the ecu. only kpro board.

Ahh full set is 1320usd. . Make sense now