Your Mods To 2006-2011 FD Civics

Quote:

---

Originally Posted by chrischris

I've got A3 sheet left over with a few stickers cut out, you can have the rest if you want for free, located in s.e suburbs endeavour hills
https://www.dropbox.com/s/11eawe9wuc...2012.01.18.jpg

---

Ohh really? I might be in that area on the weekend if you're free.
No idea where Endeavour Hills is but Im going to be around Vermont/Wantirna South


@xenonkuraz
Can you make stickerbomb sheets or know anyone that would be able to make one up?

ALSO! Does anyone know if the R18 Air Sensor are the same as the K20z?
I found and Intake System for an R18 but if the Sensor housing is the same I'll just cut it up and
weld it onto and new pipe

Quote:

---

Originally Posted by Honda_FD

Ohh really? I might be in that area on the weekend if you're free.
No idea where Endeavour Hills is but Im going to be around Vermont/Wantirna South


@xenonkuraz
Can you make stickerbomb sheets or know anyone that would be able to make one up?

ALSO! Does anyone know if the R18 Air Sensor are the same as the K20z?
I found and Intake System for an R18 but if the Sensor housing is the same I'll just cut it up and
weld it onto and new pipe

---

Was talking to someone recently, the sensor on the K20z is determined by the diameter of the pipe, so if you try and alter where the sensor sits even just a little bit, it will throw a check engine light.

(Unless if the facelift models are different, disregard that)

No. One's s map, one's a maf sensor.

Honda_fd don't do sticker bomb sheets anymore sorry

Curtis is correct, r18 is map sensor and k20 is maf (mass air flow)

Why not just buy a k20 intake.

Quote:

---

Originally Posted by lolmclol

Was talking to someone recently, the sensor on the K20z is determined by the diameter of the pipe, so if you try and alter where the sensor sits even just a little bit, it will throw a check engine light.

(Unless if the facelift models are different, disregard that)

---

Not necessarily true. Pre turbo I moved my maf around a lot, putting distance and sometimes shortening the track to the intake. No affect on performance or CEL. however if you remove the vains from the maf housing that screws up the air velocity hitting the sensor and may cause cel or jerking/stalling issues.

Quote:

---

Originally Posted by xenonkuraz

Honda_fd don't do sticker bomb sheets anymore sorry

Curtis is correct, r18 is map sensor and k20 is maf (mass air flow)

Why not just buy a k20 intake.

---

Yeah. I was looking at Intakes and saw one for the R18.

I might buy a K&N Typhoon for the 2.0L
I like the Idea of the whole Heatshield thing. I have a homemade SRI

http://farm5.staticflickr.com/4051/4...21b9ceb6_b.jpg

The typhoon kit is a gimmick. There's no point of having a short ram with a heat shield. Might as well go cold air

Quote:

---

Originally Posted by xenonkuraz

The typhoon kit is a gimmick. There's no point of having a short ram with a heat shield. Might as well go cold air

---

Ohhhh? I dont like CAI for some reason... Makes it look like theres a giant chunk of the engine missing.
If i get a CAI. Will be fog lights block the air coming in anyways?

Quote:

---

Originally Posted by Honda_FD

Ohhhh? I dont like CAI for some reason... Makes it look like theres a giant chunk of the engine missing.
If i get a CAI. Will be fog lights block the air coming in anyways?

---

theres a small gap behind the foglight so it'll still work (Y)

Quote:

---

Originally Posted by jprak

theres a small gap behind the foglight so it'll still work (Y)

---

Oh okay. And would i need to relocate the Battery?
I noticed that Hybrid Racing/Skunk2 and JDM Password comes with a relocation kit.

^ dont think you'll need to relocate. it should just go straight down. someone confirm as i dont have a CAI

Dont you need an intake manifold for the fd2?