Sorry we got none hereQuote:
Originally Posted by Lukey
Printable View
Sorry we got none hereQuote:
Originally Posted by Lukey
Im looking for an OEM piece.
Its a bracket that fits on the motor itself for a K20.
Orginally its used to connect the airbox i think.
on kwaps they put the Fuel Reg on it.
http://img166.imageshack.us/img166/2223/img3843ah0.jpg
I got none of the bracket above but you can easily make them
1 set of B18CR series water pump SOLD
1 set of B18 timing belt SOLD
1 set of B18CR oil pump SOLD
1 set of EK9 rear sway bar kit SOLD
2 sets of K20 O2 sensors SOLD
Price on Ek4/Ek9 front swaybar inc links
Sorry We got none in stock at the momentQuote:
Originally Posted by blabla
Anymore in stock? deal with ASR and shipping to Brisbane CBD?Quote:
1 set of EK9 rear sway bar kit
PM meQuote:
Originally Posted by EK1.6LCIV
Hay yonas,
Can you get your hands on an EK 99-00 front bumper? Any color is fine even new would be good
Thanks
I can get you brand new one but in primered colourQuote:
Originally Posted by hasto2770
PM me
Ok how much please :) pmQuote:
Originally Posted by EG5
Sent
1 set of 3rd to 4th syncros SOLD
1 set of B series VRS kit SOLD
2 sets of B series Bottom end kit SOLD
able to get scuttle tray/hood cowl and scuttle tray/hood cowl seal?
if so how much?
pm sent
Can you do the upper plastic trims for a ed9 crx?
Yonas, why didn't you PM me?
PM sentQuote:
Originally Posted by Renaissance_x
Been flat out in the past few days , PM me or Email or Call me instead next time. Easier that way
1 x RBC intake manifold SOLD
1 x B16A timing belt SOLD
1 x K20a O2 sensors SOLD
1 x VRS kit b series SOLD
1 x Bottom end b series rebuild kit SOLD
1 x B18C timing belt SOLD
1 x B series tensioner SOLD
1 x EK4 sir lip SOLD
Do u still have the Eg6 Sir front lip in stock? il pick one up this weekend if u have any, thanks
I will have it on wedQuote:
Originally Posted by happyspastic
hey mate, can you get your hands on ferio eg9 boot spoiler or eg9 front lip?
cheers
2 x RBC intake manifold SOLD
yonas - got anymore EK9 OEM RSB? new or used idgaf .. lol
Only new one in stockQuote:
Originally Posted by IV73CI
Is it RSB only or complete kit with D bushes, mounts, end links?Quote:
Originally Posted by EG5
Full kitQuote:
Originally Posted by IV73CI
Just PM me
How much for the EG firewall AC block off rubber plate shipped to brissy? i need two of them, and they are different size, is that plate $30 for one?
Only 1 size for thatQuote:
Originally Posted by 84AAP
Postage is $9
Yonas, are you able to get in a facelifted DC2R rear bar?
If so, how much?
1 x RBC intake manifold SOLD
Need timing belt tensioner for dc4 gsi. How much ? And in stock ?
We got none in brand new condition , call us or PM and I will check it out on MondayQuote:
Originally Posted by --drew--
Sorry we got none hereQuote:
Originally Posted by squish85
You have PM
pm's sent
Is the 'Jazz double din "Full Kit" console kit $175 ( incl wiring , dials stickers , bracket etc)' still available? Any updates/specials on pricing for OzHonda members?
Do you still have Double din radio block plate (black) in stock?
Thanks
Yes got it in stockQuote:
Originally Posted by jordanc
Hi, do you have fd double din fascia(complete) for civic 06? and how much? thanks!
any dc2r bracket for rear swaybar available .
We got none here , We have to order itQuote:
Originally Posted by rndy444
Quote:
Originally Posted by captainsky89
In stock
how much it will cost to order? tnxQuote:
Originally Posted by EG5
can you beat jdm concept eg visor set price? thankyou
I can only match itQuote:
Originally Posted by na-118
yonas any chance you have any centre caps to suit ek? doesn't have to be oem.
Sorry man no goQuote:
Originally Posted by kyzz
Can you give me a price on a 2007 Honda Civic VTI grille posted to Perth 6020.
I dont have those grill , check out your local honda dealerQuote:
Originally Posted by purple1
Price and availability on Left hand front fender 2007 Honda Civic VTI
got DC/EG fender flat amber indicators in stock?
Out of stock sorryQuote:
Originally Posted by riruiz_88
feelin annoying but car is in need of parts haha, you got any 00' EK front bumper? or EJ bumper? pref white if you can source it! thanks bro
We got brand new bumper but you have to paint itQuote:
Originally Posted by kyzz
sounds good what's best you can do man?
I need complete fender not indicators
Still have the "B16 / B18C bottom end rebuild gasket set $110" ??
Sold out at the momentQuote:
Originally Posted by Tsam
Have any fn2 window Visors? Plus able to ship to brisbane?
Cheers
None hereQuote:
Originally Posted by HmGLuCaS
1 x K series valve cover SOLD
2 x headgasket SOLD
1 x 1st to 2nd b18cr syncros SOLD
1 x 2nd to 3rd b18cr syncros SOLD
1 full set of gearbox bearings and seals SOLD
stock on the ek sir lip?
Cheers.
Got itQuote:
Originally Posted by eeko
cheers boss
do you have b series valve cover gasket set? rocker cover gasket spark plug o gaskets?
Do you have any oem facelift integra lips mate?
Yo, need EG front and rear wiper blades.
Only Mugen style lipQuote:
Originally Posted by dc2screama
We sell spoon front one but not the rearQuote:
Originally Posted by 3K9
PM for more details
Sorry, I meant OEM rubber blades.
I talk to you on the phone about the B16/B18 oil pan rubber gasket $55. Please let me know when your shipment arrived.
Got them in stock nowQuote:
Originally Posted by xeno
$55 pick up
Cheers again for the Ek SiR lip yonas!
Hey yonas. Do you supply EK9 front sways? Also, if i buy a front sway bar on itself, do i need anything else to fit it (endlinks/bushes ect)? I'm not too sure how the front works, know how the rear works though.
Also, can i only use EK/EM sways at front, or can i use something like DC2R ones?
Cheers!
I leave in Brisbane. How much for a register post to Q4113?Quote:
Originally Posted by EG5
no reply?
We got it in stockQuote:
Originally Posted by na-118
Please PM me next time
I got none hereQuote:
Originally Posted by 3K9
Sorry
PM repliedQuote:
Originally Posted by PHO
$8 postageQuote:
Originally Posted by xeno
ThankQuote:
Originally Posted by EG5