Picked up my car with the new monkey bars installed :)
Printable View
Picked up my car with the new monkey bars installed :)
for anyone that is wondering there is a light inside the demister switch that lights up with your headlights lol.
had that weird stale air con smell in the car this morning.. grrr.. don't normally use a/c much (only for gf on hot days lol) - does this mean my pollen filter needs changing?
what front lip is that? SIR? looks good.Quote:
Originally Posted by tsol0811
Just gave my civic a long awaited wash :P
Tsol, what are the specs on those project d's?
Serviced it new oil & filter, fixed leaking gaskets, built car ramps for my low machine, hooked up my fog lights :D
The car ramps we have are a bitch, they scrape underneath the front bumper on my civicQuote:
Originally Posted by blastnpast
drove it on lakeside park after breakfast with SAU on Sunday, bought coilovers for it
what brand of bike rack are you using, Im not keen on the thule silver as I have similar roof racks to yours :)?Quote:
Originally Posted by tsol0811
Pictures please :DQuote:
Originally Posted by DNYALL
Built car ramps? picsordidn'thappen!!Quote:
Originally Posted by blastnpast
Here is one:Quote:
Originally Posted by mugen_ctr
http://img691.imageshack.us/img691/7155/good1h.jpg
Rest are at the Bottom of this page in my build thread :)
http://www.ozhonda.com/forum/showthr...ior-EM1/page14
Yeap they sure are SIR!Quote:
Originally Posted by Chriskoss
The specs are 15 x 7 i think it was 36+ offset? there not strong offsetsQuote:
Originally Posted by Woodzy
The bike racks are just the egay ones but they do a great job of holding the bike.Quote:
Originally Posted by EK1.6LCIV
+ was only 2 min away from my house to pick up!
Haha I'll post pics up of my grandfathers work I lf possible coz holy crap they lifted the car up about 650mm+ and took and hour to make :)Quote:
Originally Posted by Woodzy
yea the car ramps i have, are pretty shit lol, sides of them scrap my front bar too... was gonna take it off but i couldn't get the bolt underneath to un-screw, but 2 planks off wood did teh trick to raise it up for the first part.
Haha yeah mine were built from wood and they are awesome as!! Was surprised at how low to how high we go the car ;) I need pics badly!Quote:
Originally Posted by 1996_EK_Civic
Well didn't mod or add anything to an ek
But does buying one count? :)
Sure does :)Quote:
Originally Posted by Spoon-Accord
I sold my stock 14" steelies
These things were huge old metal things, there's two nice scrapes underneath the lip on either side with some paint from the rampsQuote:
Originally Posted by blastnpast
Resprayed the front and fixed the back bumper with fiberglass kit, changed oxy sensor
pics, I have a sneaky suspicion this is a special EK ;)Quote:
Originally Posted by Spoon-Accord
Fitted Spoon rep side mirrors :)
hey greddy.. how much was that spoon mirror for?
Details on JDM Yard's thread..these are Spoon replicas by the wayQuote:
Originally Posted by newbi-ek
tried to avoid all those damn big arse puddles on the road with the monsoonal down poor over the last few days... not good for air intake lol
ah, sweet as those look awesome.. wanna get front grills soon too!
Installed my distributor cap.
Picked up my Tanabe front strut tower bar. Picked up my ITR rims and gave them a mad clean!
dropped it a few inches, handles like a machine on the new suspension setup
next, tidying up old integra engine
started to realise how much it's going to cost to get a b series transplant... sigh :(
What is your new setup?Quote:
Originally Posted by EK1.6LCIV
Agreed.. one day ill get there, once the d series puts a rod through the block, than ill definite get a b18 to replace it :DQuote:
Originally Posted by Alvis
Gave the interior a clean and sanded /polished up my black oem axle back! now its all shiny!
polished up the 5 zigen bpipe i got... well the 2 resonators hahahahaha, nice and shiny, just need to fix it up a bit before i put it on :D
Discovered a leak in clutch cylinder close to the pedal, ahhhhhh can not be bothered
hey i want a Si Grill on my 96 gli hatch where can i get 1 to fit THx :D
Why don't you get a CTR one with an Si badge :)Quote:
Originally Posted by eren
got original badges on ek1 gli hatch and did some cleaning and regular maintence :D
thx btw would ebay have it?
very nice monotube coilovers, everything hardrace sells for the ek :) will take some pics soonQuote:
Originally Posted by sneakygreek
my 10.9 bolts arrived
also may have found a mugen wing at long last
dropped the rears on my car.
What brand/model ryan? Good to see you finally got some coilovers :thumbsup:
BC Racing. BR Series i believe, same as what i have in my EG, best coilovers for that price range, sooooo happy with them!
post up some pics of your car krizyQuote:
Originally Posted by kriZy
got new buddyclub bodykit :)
Lowered it, so that there is no finger gap!
bolt on turbo kit for 1k
Just filled it up with Vortex (full tank) booyah!
no way CK!Quote:
Originally Posted by SuperJDM.
picsordidn"thappenQuote:
Originally Posted by tsol0811
i like ur DP :DQuote:
Originally Posted by johnn
What i did, stickered up the windscreen a bit :D piks up in a bit
took the bike out
http://i224.photobucket.com/albums/d...19391-Copy.jpg
considering i got her yesterday, gave her a nice thorough clean <3 oh and put some seat covers n rosary beads in her.
http://a7.sphotos.ak.fbcdn.net/hphot..._6495588_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphot..._5079465_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphot..._2267750_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot..._5232527_n.jpg
you can expect to see more of this car within a few months ahhahahah
Looks good mate :thumbsup: But I have never been a fan of bike racks on civics...Quote:
Originally Posted by EK1.6LCIV
bought 2x Honda FEO oil. Trade price. Nice :)
there is no coolant in my EK lol
it doesnt matter about the size of the car but how big ur arms are when you put it out the car.Quote:
Originally Posted by kyzz
why do you think i do weights? :P
EDIT:
in relation to the thread, got some free kenwood 6x9s and a 500W amp :)
http://img855.imageshack.us/img855/509/img0750g.jpg
No Gap !Quote:
Originally Posted by DNYALL
PICS = PQ POINT
http://a6.sphotos.ak.fbcdn.net/hphot..._6372543_n.jpg
lol useless plate @ the back cant even see if your on Red Ps or Green Ps lol
Lol yeah, thats when i open the boot with my key, have to move it...
ordered some Thule 950 roof racks! :D
rock on :), get the locks too at the same time for a deal
I sit on the floor now thanks to Vision
drove it to the station thinking how did the B16B CTR engine not make a single mention in the latest Wheels "special atmo" edition with the B16B pumping out 83.4 kw/litre (134kw/1.6litres)
... especially when you consider the Porsche GT3 RS has a kw/litre of about 87... :confused:
because gt3rs > ek9 haha
Unless the ek9 came with a roll cage like the GT3, than its got nothing on the GT3 LOL
Even thought the GT3 has crappy power to litre figure, it can actually move! lol, displacement ftw! 4 liter, boxer 6.... coupled with a mean chassis with roll cage.... ultimate track car :D
I totally agree - I absolutely love Porsche's and GT3s :)
The thing that got me is that even though the EK9 didn't make it into the Top 10 atmo engines of all time list they compiled, it didn't even get a mention in the 'honorable mentions' section of the mag... bit disappointed to tell you the truth
... altho the NSX did make the Top 10 and NSX-R also got a mention ;)
just installed itr chassis brace on my ek. waiting for asr brace and hard race rear camber kit to arrive some time today to install that along with ek9 sway bar :D! weeeeeeeeee :]
Gave her a wash and a quick photo shoot.
shes looking shmick!
http://a1.sphotos.ak.fbcdn.net/hphot..._4066125_n.jpg
finally found a stock cat back to clear my epa :D, cant wait to clear it up an put it back on
my systems finally piecing together, btw ignore the shoe its to keep the deck on an angle so yous can see it hahahah
http://img820.imageshack.us/img820/7043/img0751h.jpg
8BALLS!
install a JC-project oild catch can
woo... installed my asr brace and ek9 rear sway bar! i feel the difference eheehe lol
btw any1 here using buddy club pro spec III exhaust???
Thats the straight pipe looking exhaust right?Quote:
Originally Posted by sangyz
no thats BC spec2
BC spec 3 has a cannon on it, but still loud
service, got new front brake pads and a new starter motor
****ed my ECU up.................. fail.
koyo rad, pink bits
how the heck did you break an ecu, Im curious
went back to oem exhaust :( F you epa! cant wait to clear it an put back the cat back, car seems tooooooooooo quite, cant take it lol
You go to UWS don't you?Quote:
Originally Posted by tsol0811
I have seen this around at uni before. Looks neat as.
Getting all 4 guards rolled ready for some new shoes