Printable View
Should have it all on by next week. fking off the HID's as they were annoying. Bought some good H4's, also got some Password JDM gear to go in, shift linkage and ive already put my Radiator bracket on.
Going to do an oil change next week. so ordering in my HAMP filter and Honda Semi Syn Oil
what about your RWC workshop? if you get done again wont they get fukd overQuote:
Originally Posted by Egxris
well i got defected for dumb shit none of my mods that are going back on. cars not going under 100mm(wasnt before just the middle muffler hung abit low), all the lights are fixed, hid's removed. so everything i got done for has been fixed. i highly doubt (since i went through that many booze busses etc previously that i will be pulled over again and get dicked for other shit they didnt get me for on the last one.
+ i'll just use my trade plate for abit also. so theres no problems for them.
Nice DIY =]Quote:
Originally Posted by R34P3R
Transfered custom plates onto the civic :) PRIMAL !!
https://fbcdn-sphotos-a-a.akamaihd.n...99603302_n.jpg
sorry couldnt find an **OFFICIAL WHAT DID U DO TO SOMEONE ELSE'S CIVIC TODAY** so i thought id post it here
8 WHITE EG'S IN ONE DAY WHAT A BRAIN FRYER!http://sphotos-g.ak.fbcdn.net/hphoto...63188052_n.jpg
Holy Crap. Where do you work bro??!Quote:
Originally Posted by SU-WOOP
My god that place looks like fun.
heaven and hell at the same time by them time all the work is done im too tired to work on my own car then i relax have a drink and a think heres my situation atm http://sphotos-e.ak.fbcdn.net/hphoto...00800195_n.jpgQuote:
Originally Posted by Super-DA9
Started returning my car back to normal lol put the bride seat back in and the nardi. Normal headlights are so shit. hid's are going back in.
lol, my Eg bonnet sitting higher than stock and the intake piping so visible from the bonnet gap, my exhaust a bit loud but i never had problem so far. lucky i dont live in melb .
http://www.zcd.com.au/eg/Projector.jpg
Got around to installing my new lights!
Last Friday: Bought myself an EG4! Downside, its D15B7 powered. Upside, its EFI which should make the engine swap easier :D
Today: Installed the head-unit that came with the car that wasnt wired up. I also installed a new set of speakers after finding out the ones they left in it were f**ked (by f**ked, i mean the cones looked like swiss cheese!!). I now have beats after driving around for a week with no music
all my eg4 speakers are blown too. treble sucks bum.
Headlights look good bro.Quote:
Originally Posted by zhong
Here is a pic of mine:
http://i1260.photobucket.com/albums/...2701/029-1.jpg
Sick! How's your cut off? And do you have a provision for parker lights? Mine doesn't but I might need to make one but not sure if it'll do the projectors justice...Quote:
Originally Posted by Rayseuro04
Lowered it and put my Weds back on :D
Hey bro nah mine doenst have provision for parkers either...was gonna run my amber corners as parkers but i cant be bothered doing it now lol......The cut off is good the DENJI lights are sooooo much better than the standard headlights and you dont blind anyone by having HID's in your standard headlights.Quote:
Originally Posted by zhong
i put standard h4's back in and couldnt see shit. so back goes in the hid's at least its now safe to drive at night lol
still running stock yellow oem bulbs for the win =)
Put ASR endlinks on and it got bent by the time I got to 999 auto. Luckily James at Ison Industries put it up on the hoist and fixed it for me. Also remounted the room bar, put in a long eyebolt for the racing harness and rewired up the giant tacho, now I can haz shiftlight!
still can get defected for it though.Quote:
Originally Posted by Rayseuro04
think those were my old headlights hahah
If people are worried about defects why modify your car at all LOL.....Quote:
Originally Posted by GU357
to get defected then the worries go away =P
lol means its nice to have projectors but at the end of the day its only half way.Quote:
Originally Posted by Rayseuro04
and cops can be stingey on the whole hid business
so hated my crpapy checkered door trims so decided to do a diy... went to Spotlight and bought the soft suede in black... did it all and when i put it up next to the bride seats... they were more like dark navy... so dont buy suede from spotlight LOL
but they turned out good and will suffice until i find black black ones LOL
http://img31.imageshack.us/img31/993...9339223424.jpg
I've got the same Brides in my teg!Quote:
Originally Posted by namtaro
yerh i love them... so comfy... was the best when i went up to sydney for showcased
how much and where from?
my friend has "drift" brand seats look just like them, but his are hard as a rock, and the bottom is kind of rounded in so it feels like its squeezing ur ass from the sides, just poor design dont get them
Mine were a private sale, and I'm not sure I should spill how much I got 'em for, but it was a very worthy deal ;PQuote:
Originally Posted by Vvvtec
Yeah "Drift" Blades looks similar as they are both based on the R34 GTR seats, the Drift ones will certainly not be of the same quality and material as the Brides.Quote:
Originally Posted by GU357
lol yerh mine were cheap too... found off ebay and stuff >< lol
might be the taiwan Brides, since Bride has some issues with registering their name internationally taiwan and canada started making copies and selling them as "BRIDE". so u get dam near exact replicas, at decent price. quality isnt bad, but probably dont last aslong. but if they hold u nice n tight, then who cares.
im trying to get myself a Bride RO/MO rail or a DC2r driver rails so i can mount my SR3.
so far the best bucket seat i have sat in.
so comfortable and perfect width for skinny me.
So hard to find rails for sr3s. I'm trying to find some for my ek, and I'm not even sure if dc2 rails will fit an ek. :(Quote:
Originally Posted by GU357
nah they wont.http://myworld.ebay.com.au/eversprin...84.m1497.l2754
that guy sells good ek eg dc parts. gets bride rails recaro rails.
to mount a SR3 to a EK u need a bride RO for an EK, might work with a ek9 rail (the CTR version)
lol at u... they were second hand ones and not new fake replicas wateva u wanna call them or else i wouldnt be rocking them... when i meant ebay... means i bidded on second hand, bought them seperately... k thanks =)Quote:
Originally Posted by GU357
Quote:
Originally Posted by namtaro
no need to get buthurt bro, just ebay is like the most common place to buy the copy brides.Quote:
Originally Posted by namtaro
u just said they were cheap and summed it up very vaguely. either way it was no insult (^_^)
replica for the win,
Yeah I know about the replicas, which actually seem pretty good for the price to be honest. But I'm sure mine are genuine, from japan not taiwan.Quote:
Originally Posted by GU357
Edit: actually i painted my rocker cover today :)
http://photos-e.ak.fbcdn.net/hphotos...679_n.jpg?dl=1
what a beast
lol what a piece of crap.Quote:
Originally Posted by GU357
I run Bride EuroII's in my 180 not bad daily seats. Bucket seat in the civic ftw.
Installed my Password JDM bushes and in the middle of redoing my exhaust
http://hondaperformancepartswarehous...ift%20bush.jpg
m8 its not vroom, its boooobobobaBAAAAAAAAAAAAAAAAAAAAAAAQuote:
Originally Posted by GU357
lol, yeh not the coolest, but looking at their stuff they got some nice paint jobs there
also put in Bride RO rails from DB/DC into EG and put in my SR3, seating is so low, cant see the guages cause steerign wheel is there yolo
You like 4foot tall? Yolo indeed
nah im 6 foot, but to get the steering wheel at right height, which is ergonomic then ur hand must be at 9 and 3 sitting around shoulder height.
which makes the top of the wheel cut off the top of the guages.
raised the car on stock wheels and gave it a wash... because scared of cops
http://img221.imageshack.us/img221/9...5063403424.jpg
kidding... just my dads eg.. yep family of egs =)
http://imageshack.us/a/img28/2875/30...5086748424.jpg
You know shit is getting serious if nam is raising his car :p
ahah so jealous, 2 white EG's in good condition
is it computer altered image? i can tell by pixels
i drove mine off a cliff and bought a skyline
Couldn't handle the power of the d15bt?Quote:
Originally Posted by jeremydawg
na mate, im dropping in the d15b. rb26 just isnt the sameQuote:
Originally Posted by PHO
[QUOTE=Stoogey;2953766]Installed the last part of my a/c system today, the receiver drier. So it's ready to be flushed and regassed...finally...aircon...just when the weather gets cooler......awesome....
im going to install a/c in my eg hopefully through the week (getting pulled out of a wreck tomorrow) and was wondering if you have any advice on installation ?
the engine bay is wire tucked so its probably going to ruin the "look" abit but its just too damn hot ! anyone ever seen wire tuck with aircon ? pics? tips on making it still look half deacent ? lol cheers
fix your tags!
post looks retarded.
keep a clean engine bay and having aircon at the same time?
might be hard because of the plumbing for aircon itself, but try have the fan wires out of the way.
PM memeber SU-WOOP he has some clean EG's most are tucked, i would imagine he can shed more light on it since he does it for a living
Fixed my overheat problem, yay!
finally started my manual conversion!!! but goddammit the brake pedal was such a bitch to change
whats happened to all the egg's this happened today
http://i405.photobucket.com/albums/p...ps61e2b497.jpg
http://i405.photobucket.com/albums/p...psffb5585a.jpg
http://i405.photobucket.com/albums/p...ps3408f1ec.jpg
lens got something on it lol but keeping this thread alive come on guys
raised camber arm clearance?
Nah just paint stripped full shave and repaint
i painted my rims gunnmetal gray :D <3
took CYA 13B out of the garage and let her run for a while :) gotta keep that engine lubed and that battery charged!
I raised mine UP !!! first time EVER raised it UP... not happy about it but only had 40mm clearance on Spoon header and have Track day coming up... now have 80mm clearance but 2.5 finger gap on the wheelarches - devastated :(
http://i89.photobucket.com/albums/k2...ps6f3e4e44.jpg
nice which colours that from? similar to what i want i, i just want something a bit darker
Nice! Who did it?
been wanting to do this mod for years now...:)
http://i8.photobucket.com/albums/a8/...820e51acee.jpg
Took out the rats nest that was the previous owners sound system, replaced the broken climate control with one that works and installed my stereo properly.
Good progressQuote:
Originally Posted by Loagz
im back into da car scene.
http://imageshack.us/scaled/landing/...6951426854.jpg
http://imageshack.us/scaled/landing/...4731981242.jpg
http://imageshack.us/scaled/landing/...9279907347.jpg
http://imageshack.us/scaled/landing/...8611123043.jpg
http://imageshack.us/scaled/landing/...5922446655.jpg
http://imageshack.us/scaled/landing/...8431275813.jpg
http://imageshack.us/scaled/landing/...6988711472.jpg
We did in our workshop :) @ http://www.primalgarage.comQuote:
Originally Posted by collEGe_boy
Drove it at the Honda Nationals on the weekend :)
http://sphotos-f.ak.fbcdn.net/hphoto...95883213_n.jpg
Some polishing and popped on a new badge and sticker.
http://i164.photobucket.com/albums/u...troom-3860.jpg
http://i164.photobucket.com/albums/u...troom-3865.jpg
http://i164.photobucket.com/albums/u...troom-3863.jpg
Can't see pics :(Quote:
Originally Posted by Red_EG4
Take two!Quote:
Originally Posted by Super-DA9
Very nice!
Thanks :)