can you confirm the part number is 11251-p30-004 please.Quote:
Originally Posted by EG5
Printable View
can you confirm the part number is 11251-p30-004 please.Quote:
Originally Posted by EG5
Thank for confirm the part number is 11251-p30-004, money had sended.
Hi Yonas, can you please PM me a price for OEM EG tie rod ends (both sides) shipped to SA 5158. No rush I can wait, thanks mate.
Can u get the interior sales for an ej8?
Hi Yonas, do you have any B series OEM 1.1 BAR radiator caps? If you do please PM me the price and whether you have some in-store at Smithfield or if it needs to be shipped. Thanks!
We only have buddyclub and mugen radiator cap . They are both 1.3 barQuote:
Originally Posted by Marky
How much for a wiper delete plug for a dc2?
Also do you happen to know what the part numbers are for a 98+ dc2r front bumper and rear bumper?
Not sure about part noQuote:
Originally Posted by --drew--
I dont have any wiper plug delete for dc2
Would you happen to have stock of a CF cluster bezel for ek's?
can you guys source the jdm ctr ep3 rear badges?
UK flag"civic"
and the "type R" that goes underneath.
will check and get back to you!Quote:
Originally Posted by butterfingers
RRC K20A intake manifold in stock~
http://a8.sphotos.ak.fbcdn.net/hphot...26848403_n.jpg
yeh yonas,
i hope u guys have settled into the new shop & setup as best u can...
just reminding u, i was after ek SIR pre-facelift front lip...
thanks champ. Doubt honda Australia or rick damilion etc will have it as they dont sell jdm ep3r here...Quote:
Originally Posted by EG5
Thanks manQuote:
Originally Posted by IEVAQ8
They are in stock
plz pm me details for paymentQuote:
Originally Posted by EG5
congrats on the move!
do you have DC5 window visors in stock?
Hi. Got any CL9 Window visors?
ThanksQuote:
Originally Posted by ogen
DC5 visor in stock
We are sold out on mugen oneQuote:
Originally Posted by BLKWLF
hi yonas, do you know if double din block off plate fits in dc2? (where single din radio and pocket thing goes)
if it does ill grab one if theres one in stock
It will fitQuote:
Originally Posted by Lukey
In stock
pm sent
do u sell by any chance or can get
Honda Bond HT Silicone Liquid Gasket for Oil Pans and Valve Cover Gaskets for ALL Honda
Pm me a price.
You have a pm Yonas.
yonas, do you have oem brake pads f + r for honda civic fd vtil or any brake pads that will suit. how much? thanks
Pm sent sent regard parts
RepliedQuote:
Originally Posted by blabla
Pm'ed for order of b16a timing belt and single din block of plate.
Yonas. Still got pre-face ek9 headlights in stock? Pm me price if thats okay. Thanks.
Can u get accessory belt for dc5/ep3?
i need a oil pump thats going to rev up to 9000rpm on a k20z civic sport, how much for one that will fit.
PM meQuote:
Originally Posted by cuongn
Easier to do jdm k20a swap
Are you able to source a Dc2r front lip?
are you able to get an eg9 oem front lip?
PM meQuote:
Originally Posted by VTI
We cant get them anymoreQuote:
Originally Posted by 2MPRS
Can you do Prelude bb6 door visors, shipped to Perth?
Are you able to request a part through Honda if i supply the part number?
PM sent
Pm me with your post code , i might still have 1 moreQuote:
Originally Posted by curtis265
YesQuote:
Originally Posted by grifty
If they are not discontinued we can get it
Price on part number 35880-SEAE11 delivered to door?
Please email sales@jdmyard.com with your postcodeQuote:
Originally Posted by mikey72
Paid and received the item. itching for an opportunity to install itQuote:
Originally Posted by EG5
Thanks
Do u have any cl9 sport pedal kits (AT) ?
do you have any stock left for b16a head gasket kit
They are discontinued item from HondaQuote:
Originally Posted by Player_Hater
Gotta be purchased seperately
Hey Yonas you still got any Jazz double din "Full Kit" console kit $175 ( incl wiring , dials stickers , bracket etc) and the oem honda ashtray?
In stockQuote:
Originally Posted by delushunz
1 set of EK9 rear sway bar kit SOLD
Can you get the JDM OEM side mirror module for the CU2 Accord Euro?
We got noneQuote:
Originally Posted by OMGRX7
but if you email us the part number , we can get it
OEM Honda S2000 antenna full kit ( Can be used on DC2 integra)
$195 incl GST
http://farm9.staticflickr.com/8357/8...bd90a1c5_c.jpg
OEM Honda S2000 clutch master cylinder ( Can be used on EG / EK / DC2 with Checkrd Sports spacer )
$175 incl GST
http://farm9.staticflickr.com/8512/8...67f48e6d_c.jpg
OEM Honda B16A/B18C spark plug leads
$145 incl GST
http://farm9.staticflickr.com/8378/8...f4f9247c_c.jpg
Oem crank pulley to suit GD3 jazz 1.5 2002?
pm sent
do you guys have ek9 titanium knob?
What about oem dc2r cams and pistons yonas?
pm sent
ThanksQuote:
Originally Posted by T i e t
Oil filters in stock? Also have you got the gasket for the iacv?
Any B16/B18 rocker cover gasket kits in stock?
Cheers
OEM HONDA made in japan oil filter in stockQuote:
Originally Posted by blabla
They are in stockQuote:
Originally Posted by AusVTi-R
Still possible to get OEM DC2R/EK9 gearknob? If so can you please PM me the price, thanks
Yes still possibleQuote:
Originally Posted by Tegzieboi_BAR
$360
Daym... yea might give it a miss sorry
hey mate possible to get con rod bearings for b18c type r? cheers
do u guys have the EK9 front red badge in stock? Else, is the DC2R one the same and in stock???
Yonas I'm also after dc2r red front and rear H badge
Pm me price to melb 3058
Cheers
PM sent
You have Pm
OEM Front Civic EG Driver and Passenger Seat Belt, Possible?
Do you sell Sport pedal kits for the CU2?
We got automatic sports pedals for itQuote:
Originally Posted by kelvinator124
Do you have Integra DC2R brake master cylinders? and price? Thanks
Hey guys
Do you do ef8 driveshafts?
Need some asap posted to qld 4500
Regards
Scott
any rear lip to suit EJ8?
cheers
Sorry we dont have any more oem honda lip to suit ej8Quote:
Originally Posted by subie
How much for pcv + pipe for fn2 yonas?