http://www.ozhonda.com/forum/customa...tar24136_7.gifQuote:
Originally Posted by aerithyn
Printable View
http://www.ozhonda.com/forum/customa...tar24136_7.gifQuote:
Originally Posted by aerithyn
Quote:
Originally Posted by Areis
have a read :)
http://www.modified.com/tech/0507_sc...2/viewall.html
Haha probably me and the black civic except he went towards livo and I turn into Lansvale to get to CabraQuote:
Originally Posted by FDHarry
Madcunnts
Umm I want it perfect before I sell it.
Thanks Dez! Good read. Gonna fix it depending on how much camber plates are.. If they're too expensive, just gonna go with the camber boltsQuote:
Originally Posted by ekdez
And lol... Racing in a civic --. Your just wasting your petrol!!
You're looking at $3-400 for ASR plates, which I did look into. D-spec or whatever the cheap coil brand name is sells the tops for around $250, and there are generics for a bit cheaper.
With the generic brands, you need to drill the 3 holes to fit the car.
Camber bolts will get you +/- 1.5 deg. That, really, is sufficient for your purpose IMO. More camber will have the tyres wearing badly, and have your car wandering a bit in a straight line.
And for the price comparison, it's really up to you. xD
Lol there is no way im spending 3-400 haha! Camber bolts it is!
Couldn't pm xeno as his inbox was full
Just wondering how much did turbo cost for his fd2
Parts + tuning
I have a fd1
Would be different man for you man.
Completely different engine, kit, tuning etc.
Ballpark $$ would probably be similar, I'd imagine around $10k
Duffy, change your avatar bro, car looks so much better now haha
Hey guys, does anyone know where I can get a mugen/lookalike wing like this in brisbane?
http://www.jdmconcept.com.au/jdm-ima...-k0s0-zz_1.png
Anyone know where to find a bolt on high flow cat for our cars?
I got one in Sydney =| try eBay? There's a range of shops in Sydney that sell it, maybe you can call them and ask if they do shipping. Shift performance, JDM yard and JDM accessories all have itQuote:
Originally Posted by mikeyy
http://www.ozhonda.com/forum/showthr...x8-35-Toyo-T1R
oo my old wheels lol. best fitment for the FD civic! - i wish i never sold those wheels.
Quote:
Originally Posted by ekdez
..but they would be useless on ur beamer. speaking of which; have you donr or plan to do anything to it?
yeah i wish. 1's look mad with LM's.
and nah lol. if i do ill let you know =]
get some LMs for the 1!
i want BBS's on my car now =(
look so hot on duffys FD =(
Buy mine!Quote:
Originally Posted by jprak
LOL?! you serious? why you selling for?
Noessssssssss. I wanna be unique :PQuote:
Originally Posted by jprak
http://img.tapatalk.com/31b20851-dacb-93b5.jpg
http://img.tapatalk.com/31b20851-dadc-e888.jpg
Lips all polished up!
Got done by a top bloke in Caringbah, his name is Paul, pm me if you wanna use him too!
Now to decide on what color to respray the centres....
Selling cause I want a new look lol! I had it up on jdmst for a bit. 17x8 +20
Lol nice one Duffy ! I'm tryna save up funds so I can decide what to do with the car... Maybe meisters? White centers? ;)
get centres painted white duffy.. ive always wanted white centre LMs but cbfd doing it hahaha
aries, those all 4 wheels? or they have diff specs? pm me pics + price ;D
Got my greens :D
^awesomeee
bought oem fuel filter from honda, it cost me $98, Cant believe that its cheaper than other aftermarket sellers of OEM parts.
any of you guys will come to the shiftperformance trackday? just for experience ;)
I get my OEM fuel filters for $40...
Really? For 8thgen?
Wherehrehrehrhehrherhehrhterererer?Quote:
Originally Posted by xenonkuraz
PS.. RR fender flares on
Show us a pic!!
teaser pic duffy! ;)
Will 17x9 +22 fit? ;) I'm gonna try it
18x9 +20 fit all round with a 215/40r18 =}
oh how i miss my civic
http://i301.photobucket.com/albums/n...g?t=1336821770
Thanks for telling me mate. I am SO KEEN NOW!!! :DQuote:
Originally Posted by ekdez
my old set up.
17x9 +25 front
17x9 +20 rear with max - camber from skunk2 arms
http://i54.tinypic.com/2mgqlbp.jpg
http://i55.tinypic.com/nzk8kj.jpg
Thanks again guys. BBS are sold pending payment and pickup on Tuesday and then its time to fit some 17x9 +22s :)
rpf1's? lol
Saw my second fd2r at rhodes today.. a black one with gunmetal ctr rims and brembos. Fat aussie chick driving it as well.
just got the mugen style kit but haven't painted it yet!
http://a6.sphotos.ak.fbcdn.net/hphot...21663694_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphot...30643883_n.jpg
No. Te37s with concave
And love heart. That's clean. Good work
Guess who's naughty exhaust blew an airbag on Saturday night? -.-
Bottoming out everywhere ftl.
oh snap! bl man
Haha there's the story
https://www.facebook.com/allstarscarshow
So lucky I re-rolled the rear guards. But the plastic rear tab was cutting one of the rear tyres, so after 40kms I decided to rip and cut the tab out. Now I can drive around aired out in the rear - but bounces everywhere.
Am organising new rear bags this week, just need to resolve the exhaust being too close issue.
Good (but exxy) learning experience overall :)
u sold it?Quote:
Originally Posted by ekdez
he parted out <.<Quote:
Originally Posted by curtis265
got his J's racing exhaust ;D
thanks again Dez!!
Car looks niceQuote:
Originally Posted by loveheart
== didnt see this comingQuote:
Originally Posted by DuffyFD
close to. parents drive the car now. its stock as a rock with a body kit, roof spoiler, and mugen visors and HIDs in drivers and foglights. lolQuote:
Originally Posted by curtis265
@jprak.. all good man sounds awesome hey.
yes it does dez!!! very happy about it (Y)
Aero, I tried to PM you but your inbox is full.
Just wondering what spec tyres you ran on your setup?
did some photoshooting via rta..:(
http://i2.photobucket.com/albums/y35/ozcity/bli.jpg
lol bad luck man... which camera is that on penno rd? down past cumbo?
lol thanks for letting me know. i wonder how long its been full for? ive been absent from this forum for a few months now... that could have stopped a sale on my wheels.Quote:
Originally Posted by Areis
anyway, tyres i had on the bbs set up were 215/40/17 all around. needed the stretch + camber to cram them under the guards
near carlingford station..infront of pizza hut....didnt know that there is a camera there..lolQuote:
Originally Posted by black8thgen
nws man, thanks for the reply :)Quote:
Originally Posted by aero
new wheels will be acquired in two hours :)
Mad! PicsorbanQuote:
Originally Posted by Areis
Noway there's a camera there? Isn't it just the one outside Carlingford Bowling Club??Quote:
Originally Posted by fitme
I do a million km/h past where you're saying, and I've never seen or been fined?
Quote:
Originally Posted by DuffyFD
details says its between coleman ave and evans st...got 1 demerit+ $93
yeah that's the one outside the Bowling club.
My question is how did they make out the number plate?
^ they got 2 photos..
The old
http://a5.sphotos.ak.fbcdn.net/hphot...00625034_n.jpg
.... and the new (:
http://a8.sphotos.ak.fbcdn.net/hphot...38051199_n.jpg
But this is how she currently sits ><
http://a2.sphotos.ak.fbcdn.net/hphot...62603795_n.jpg
real? not rota's right?
Duffy... Would i ever downgrade from the BBS to rotas!?
um. I say no to that question, right?
Seriously fit them already, cannot wait! Now we can go driving together again since we don't have the same looking setup!
P.S. you need to change your mirror indicators to amber colour
yeah real te37s 17x9 +22 :)
I'm just sourcing second hand tyres right now cause I am poor as ****! I may have found the tyres alreeady, gonna cost me $180 all up + fitting. Just deciding whether I should try sell my FD stuff first then buy the tyres, or just borrow money in the meantime haha. How much does fitting usually cost for all four?
what do you mean by amber colours? :S:S do u have a pic?
^ fitting including balance will be around $15 per corner
thanks. does that including stretching :S:S ?Quote:
Originally Posted by fitme
Yus, if they stretch it, they'll balance and fit it too.Quote:
Originally Posted by Areis
just got my new shoes put on today too, as of 5 minutes ago =P.. too dark to take a pic though so probably on friday or the weekend ;).
Zzzzz scrubbing onto the petrol tank cover now lol that is one annoying sound.... Should I just leave it and let the wheels rub down the plastic cover a bit? Or should I put the skinnier width rims on the rear?
as long as its not hitting the piping its fine :)Quote:
Originally Posted by black8thgen
my plastics worn through haha
How far is the piping from the plastic?
~2-2.5 cms i would say
might be joining the FD scene sooner than i thought, always loved 07/08 fd's and considering I wrote my EK off i'm looking at about 3 ATM. First thing i need to get rid of is those horrible stockies, black rpf1s are seeming the way to go.
concave te37s. nice!
i got some work 57pro-s going on mine soon
OR you could do what i did, and that was cut down the plastic vertical next to the fuel pipe. then gaffa tape it tighter :PQuote:
Originally Posted by black8thgen
Have u got a pic? =P
omg i may as well do that as well since my cars is on stockies! thanks for the idea lolol!! scared the TE's will hit it if i don't adjust the camber correctlyQuote:
Originally Posted by ekdez
and kyzz, are you sure you wanna join the FD scene? its a dying scene lols! I want to leave the scene except I cant even get my car sold... so ceeeeeeeebs!
tbh everythign is dying these days other than stanced drift cars and kswaps.. these guys are asking $12500 for a 14 year old car with 200000kms just because it has vtec, when i can buy a 2008 model civic with SOHC vtec for 9500.. car logic hey.
how much you wanna sell it for? haha