Coils + aggressive wheels and you will have one mean ass civic!Quote:
Originally Posted by jprak
Printable View
Coils + aggressive wheels and you will have one mean ass civic!Quote:
Originally Posted by jprak
I wanna know where to buy the H pattern sticker. You can be defected for not having one..Quote:
Originally Posted by lolmclol
Anyone know?
Serious? o.0 .. Also one to go on the shift knob or one to sit like just beneath the shift boot?
I have a few lying around from my old razo knobs.
I have a titanium arc knob and i love it so much better than those razo ones
will make the interior look so gay...
blue tak it, for when you get pulled over you can quickly slap it on ;D
LOL... that's actually a great idea... however.. i doubt anyone's first instinct is to blu tack on a piece of plastic when getting pulled over lol
lmao so gheyQuote:
Originally Posted by DuffyFD
Duffy, get this
http://www.ebay.com.au/itm/MUGEN-SHI...item53eeeba0bb
place it under where the shift boot is being held(the surrounding)
(dark grey area)
http://2.bp.blogspot.com/-cjQKgnBvFS...00/18gljs4.jpg
yea i know its a auto civic pic but you get what i mean ;D
^ Was looking for that ... could have sworn JDM Concept used to sell it (where I was looking).
Hahaha also thought you were trolling telling him to buy an auto xD
don't shift miss?Quote:
Originally Posted by jprak
Mad English
almost every jdm part that has words will be worded worse than a 2 yr old
When i first put it on, it took me a couple of attempts to align it as perfect as i canQuote:
Originally Posted by jprak
I originally had the mugen visors on but one of them snapped -.- so i got some OEM JDM ones. IMO i reckon they look better than the mugen ones. My setup is nice and simple.. nothing special. 18x8.5, offset im really unsure.. im guessing +38.. correct me if im wrong.Quote:
Originally Posted by lolmclol
EGB, was your car in cabra tonight? saw it driving but saw a girl driving it <.<
Haha wasn't me Lol, you would know it's me buddy club race headers and basically straight 3inch cat back
i have been reading here about FD1 mods, and am trying to get a catback for my 07 model.
Found this on gumtree, it sounds pretty good from youtube vids.
http://www.gumtree.com.au/s-ad/marsf...ent/1007576827
swear?! AHHAHAH i thought it was your car. stock white FD sport with yellow foggies.... XDQuote:
Originally Posted by EGB
Skunk catbacks are freaking loud! Get it !Quote:
Originally Posted by Wazzabii808
Was only joking mate, sorry. Love your wheel setup though.Quote:
Originally Posted by Baygon
The OEM Honda visors look on par as good as the Mugen ones, I just wanted to trade my kidneys for my Mugen visors :-P. The OEM Honda ones just don't scream racecar :-P.
http://cdn.memegenerator.net/instanc...x/24005427.jpgQuote:
Originally Posted by Areis
The megapower is the obvious defect me horn, if I remember right.
id ditch the visors all together
cleaner look :)
I love my visors :-( .. allows me to have the window down even when its raining!
Had mugen visors, the change the lines of the car too much so took them off.
If you can find those black slim visors similar to what some Subaru libertys have, then I'd snap them up.
That looks alright heyQuote:
Originally Posted by lolmclol
If its lined up perfectly, otherwise can look o_o
I personally prefer loud exhausts, especially on a civic. I've seen too many with just a muffler and its still piss quiet. Which is why im going for the BC catback. Or maybe its because I drive an mx5 with an I/H/E combo and I just love the sound :DQuote:
Originally Posted by lolmclol
Yeah the AVS ones. They're in the US. Yet to.find a place that will ship to Australia.
Hahah nice weekend car, I presume? :-PQuote:
Originally Posted by Areis
Redirection mailbox? I've got no recommendations, always eventually found a way to get stuff to Australia.Quote:
Originally Posted by DuffyFD
Anyone want sound clip of my full 3" exhaust to magnaflow muffler (4" inlet, dual 2.25" outlet) on startup?Quote:
Originally Posted by Areis
do ittttt
http://www.youtube.com/watch?v=Q1IOkOnZxFU&feature=plcp
fawk it sounds terrible on video (iphone 3)
Haha na mx5 is dads car but I drive it 50% of the times and the FD the other 50%
And xeno: that is one nice sounding FD. :D:D
So jealous mate, my friends dad owned both an MX5 and an RX8 ... such beautiful cars to drive >_< ...
Nightmare to upkeep though ... specially that rotary beauty <3
That sounds really good xenon, would love to hear at full noise.
heres some of mine.
My mate driving mine at Wakefield.
http://www.youtube.com/watch?v=8oQs0dDDxR8
& Epic Pretune
http://www.youtube.com/watch?v=2oS8CHOV4d8
suprisingly my one is very quiet on full throttle, you hear the turbo spool more than anything, but there is none of the typical honda 4cyl raspiness. It's like a rexy burble.
and GG driving it pre-tune, AFRS would've been like 1000:1? LOL
http://a6.sphotos.ak.fbcdn.net/hphot...55743360_o.jpg
needs more low yes? and maybe new set of wheels? LOL<.<
how was J's kitch last night johnnyQuote:
Originally Posted by jprak
LOL?! saw my car and me? hmm it was ok. were you there?
We were inside lolQuote:
Originally Posted by jprak
Btw what specs are the wheels and are they reps
Bored so had a little fun with a universal front lip splitter, for tha lols
http://imageshack.us/a/img841/1147/img0698ua.jpg
http://imageshack.us/a/img594/1336/img0702la.jpg
Looks gross doesnt it..
I like
just wanna share mine.
http://imageshack.us/a/img706/2073/dsc0989caption.jpg
http://imageshack.us/a/img526/3779/4...3588003239.jpg
Uploaded with ImageShack.us
Needs kit or low
17x 7 +35 works vs-xxQuote:
Originally Posted by butterfingers
no reps genuine works
Nice, looks similar to one of the ones I was using.Quote:
Originally Posted by Baygon
Suggestion: Leave it flat where the kit has those indents on either side.
offsets mad :)
http://i50.tinypic.com/350uhkp.jpg
Did a bit more modifying of the lip after this, but this is from Sunday
http://i50.tinypic.com/2l9sjzo.jpg
Shaving the rear quarters soon to get fatter in the rear.
Again .... You must spread some Reputation around before giving it to DuffyFD again.
Nice stance man, very impressive. Also no fog lights or is it for intake?
Haha thanks man! I reckon no foglights is more aggressive. I thought to run a cold air pipe down there but haven't decided yet. Or whether run DRLs like my favorite RR pic.Quote:
Originally Posted by lolmclol
What u reckon?
http://img.tapatalk.com/d/12/10/08/3ytusyja.jpg
I'm getting DRLs like those in soon. Anyone interested in a set?
run both DRL and the CAI pipe? make the pipe black so you wont see it ;)
Why not these?
http://www.ebay.com.au/itm/Honda-CIV...ht_2089wt_1151
My foggies arent wired either, dont know how to lol :(Quote:
Originally Posted by lolmclol
they look a bit weird being on the lip
DRL's for sure man, I personally think the DRL's look way more aggressive located higher as opposed to some I've seen on 8thcivic where they're incorporated in the bottom lip.Quote:
Originally Posted by DuffyFD
Was tempted to say cold air though, but you currently still have your SRI running yeah?
That picture ... need to change my shorts :<
has anyone tried changing their speedo to a SI one from the US?
wait .. disregard .. but wouldn't it be set for MPH? or just a display?
jprak; visor; http://www.ozhonda.com/forum/showthr...ivic-FD-parts-... (2 months old though >_<)
honestly....i dont know LOL<.< maybe mph<.<
meh!
so expensive for rear? found it for 70 on ebay LOL<.<
Might be some splicing work, but you could do it similar to the OEM ones as the adapter for it is just chilling next to the water or coolant tank? But you then still need the relay and all the other doodadsQuote:
Originally Posted by Baygon
Ah .. sorry man, haven't really had a look on ebay yet haha.Quote:
Originally Posted by jprak
I have a set of mugen rep visors if you want them. Pm me
looking good duffy! glad to see you finally got the rims and the front bumper back on haha
it looks like you're gonna destroy your front guards even further than already though.....
Looks sick Duffy!! Did you end up angle grinding the front guards? I probably should start doing mine soon so I can fit the BBS.
And damnnn guys, I want to go RR front now.. It's either that or fix my whole front bumper/lip... Or I might just cover it up with the CF v lip..
honestly, go typeR front with mugen/J's lip... i reckon that's a good mix between badass and subtle ;)... if i still had my fd i would have gone in that direction
also areis... if u get a cf v-lip you're going to destroy it with ur ride height... its the reason i didnt get one either lol.. i had a DIY rubber lip that ripped off in 2 days =.=... don't want to destroy that CF!
what lip options are there for oem bumper?
i tried emailing a website about their v lip, its matte black and cost 87$ im trying to get a quote off them to ship to syd
AsiaQuote:
Originally Posted by xenonkuraz
http://www.8thcivic.com/forums/attac...3-12.27.04.jpg
Mugen
http://nextmod.com/webstore/images/d...KC1_0240_2.jpg
Mugen Type R (going to require some sort of dremel work)
http://www.kplayground.ca/images/CTR...lip%20copy.jpg
This user got one to fit on an OEM R18 USA civic bumper:
http://www.8thcivic.com/forums/insid...vic-front.html
J's Racing (Type R) (dremel work again most likely)
http://1.bp.blogspot.com/_xAW6O1fFlV...2jsracing2.jpg
This user got one to fit on an OEM R18 USA civic bumper:
http://www.8thcivic.com/forums/insid...l#post10915768
http://www.8thcivic.com/forums/intro...t-serious.html
http://a1.sphotos.ak.fbcdn.net/hphot...84989406_o.jpg
nice car yo~!
someone needs to go 18's and this low.. i dont understand the whole 17" thing..
What website? i cant find any ):Quote:
Originally Posted by jprak
FYI Guys,
For sale: FD/EP3/DC5/S2k Brembo Brake Setup - 300mm Setup
Includes: JDM DC5R Brembo Calipers, [1500kms old] RDA Slotted S2000 Rotors, [1500kms old] R33/R34 GTR DS2500 PADS
Price and price conditions: $1150 + Postage if req
http://www.ozhonda.com/forum/showthr...S-S2000-Rotors
after12 motorsportsQuote:
Originally Posted by kikimushroom
got a quote 87$ for the v lip
shipping 280== rip hard..they freighting it<.<
I would love to go 18s except super RS's cost a fortune... and ****... that is a real nice picture!Quote:
Originally Posted by ekdez
Arris are u selling ur xd9s?
Uhhhhhhh, yes and no. If i get offered a good price then yeah ill sell them because I need to finish my BBS.Quote:
Originally Posted by butterfingers
Quote:
Originally Posted by jprak
Dude all those sellers that ship from the US use either FedEx or UPS which is good for time and handling, but cost is like a pole where the sun don't shine.
I've been considering ordering the Mugen Type R lip from Japanparts.com ... lulz 600 lip ... 300~ postage. But if it doesn't fit, I'll feel pretty bad dremeling it lulz.
Was going to buy the lip from Seibon Carbon, contacted them, said they would get back to me, but I don't think they're interested as I'm not ordering a bonnet -_-.
yea japanparts shipping is meh! orderd some parts there before and they can help you source some parts as well=)Quote:
Originally Posted by lolmclol
Let's do a group buy then? Save on shipping right?
ahaahh from what site duffy? after12motorsports or japanparts? LOL
Either?