oh wow Baygon ur car is the exact look im going for for my FD!! except planning for bronze enkeis.
do u mind telling me how much the bodykit cost to paint+install?
Printable View
oh wow Baygon ur car is the exact look im going for for my FD!! except planning for bronze enkeis.
do u mind telling me how much the bodykit cost to paint+install?
Full kit - $1000Quote:
Originally Posted by starocean01
Paint - $1000 (Depending on where you go)
Install - Free (http://www.ozhonda.com/forum/showthr...odna-civic-FD1)
Nice wheels Baygon :thumbsup:
clean !
Haha yeah man, gonna need some spacers!Quote:
Originally Posted by black8thgen
Quote:
Originally Posted by starocean01
There you go starocean01. :)Quote:
Originally Posted by lolmclol
Quote:
Originally Posted by heyalannn
Thanks guysQuote:
Originally Posted by hencanwa
Lmfao.Quote:
Originally Posted by Baygon
You must spread some Reputation around before giving it to lolmclol again.Quote:
Originally Posted by lolmclol
Yeah they're too weak. I was this close to getting them in 17x9.5 +18 which would set your car off perfectly.Quote:
Originally Posted by Baygon
I run spacers on the front, have been for 18 months or more. I suggest you get 2 sets of 20mm.
Problem with rpf1s is that until they get 9inches wide and around +20 offset the faces look soft.
Only thing thats stopping me from going aggressive is because i take a full load quite often. I was thinking around 10-15mm of 2 sets. What brands of spacers you running Duffy? Eibachs are heaps good but a but pricey. At the moment im running 215/45 tyres and i think i should switch to 215/40 when i do get the spacers.Quote:
Originally Posted by DuffyFD
Hey guys quick question on wheel fitment. I've read the EP3/FN/FD wheel setup thread and still need a bit of confirmation.
I'm looking to get 18x9 + 32 wheels for my FD. Planning to lower to about 1 finger gap on Buddyclub C N+ coilovers soon. Will I run into scrubbing issues with 225/40 kumho KU31 tyres? I'm looking at these tyres because they meet the minimum load rating. I'm aware that I'll need a bit of guard work (front and rear?) but will that completely eliminate scrubbing?
Thanks!
You're going to need to camber that shit.Quote:
Originally Posted by envoytheguy
hey lads, when installing a muffler on a fd, do any mods need to be made? (previously on a fd)
http://i358.photobucket.com/albums/o...1/R0011814.jpg
Hahaha Im guessing natural camber isn't enough? You're referring to the rear wheels right?Quote:
Originally Posted by lolmclol
haha yeah munted guards were from LMsQuote:
Originally Posted by black8thgen
no... unless ur an fd2 and its a catback.Quote:
Originally Posted by simmy
sweet, just worried about the clearance of the bumperQuote:
Originally Posted by Areis
My x-force.. This was on a fd1 with a fd2r rear bumper.. If u want to fit it on fd1 with stock rear bumper, mods need to b made for clean fitment as fd2r muffler openin is more to the right
how about on a standard fd1 bumper with and without a rear lip?
what type of mods are you talking about? like hacking the rear bar or getting longer rubbers so it hangs slightly lower
Mods would b better done on the muffler rather than on the bumper.. The flanges prob need to b relocated and mayb the pipe to b recut.. Muffler shop can do this for ya
Hey guys, I need an option on what will looks nicer. My wheels are 18x8.5+30 & I'm after a new set of tyres.
1. 225/40R18
2. 215/45R18
Which one will have a nicer looking fitment? I'm guessing the 215/45 will have a better stretch?
235/40/18 will look kinda square, 225/40/18 will look slightly stretch , 215/45 stretch for look and comfort ill take 225 40
I have the buddyclub catback on my FD2. I also have the mugen rear lip and its melting it gradually. This is because my exhaust is designed for the US model and thus sits a bit shorter. I'm going to fix it by getting the exhaust cut, extended and then rewelded. Hope this helps in any way.Quote:
Originally Posted by simmy
Heyalan: go for 215/40 IMO.
Finally new shoes & photoshoot today!
http://farm9.staticflickr.com/8332/8...3347a38d_k.jpg
^ nice wheels
soooo got bored and new mod:
http://sphotos-g.ak.fbcdn.net/hphoto...94499435_n.jpg
velocity stack with direct air feed to my carbon intake :cool:
am yet to test the difference but will post feelings tomorrow :thumbsup:
Anyone ever thought of replacing the stock horn? I've been meaning to switch to an Accord Horn, but no idea where to source one, nor install it! (Yes I'm a newbie with a FD).
I replaced mine with two Hella Supertones. Sounds just like the Euro horn (maybe even louder).
eBay 'Hella Supertones' and all you have to do is remove the stock horn (behind the bumper) and wire the new ones in, 30-60min job for a novice.
yeah civic horn was shit.... my s2k horn is a lot louder coming from a smaller car makes the fd horn sound like a whisper
http://www.hornblasters.com/video.php
:thumbsup:
someone install one ! wanan try after :LQuote:
Originally Posted by lolmclol
Been contemplating it for great lolsQuote:
Originally Posted by jprak
Yummay! Everybudday gettin' da new shoesQuote:
Originally Posted by itachi-kun
anyone know any decent place that sells the rr lip kit?
^Quote:
Originally Posted by Bobo
http://www.ontherunmotorsports.com/
get it from them. =)
LOL me too, i've been thinking of doing something like this for some mad trollsQuote:
Originally Posted by lolmclol
I had a police siren in my forester lol every time someone pissed me off I'd let off a couple "woot woots" and they'd pull over haha
Yeah cheeky bastard Xenon !
years ago I had some country boys in a Lancruiser station wagon get me to pull over, theyd installed very tiny red and blue flashing lights low down on ther bumper, as I pulled over off the highway they drove past pissing themselves with laughter !!
Anyone fitted bride gias seats to their FD? Allstars is this weekend and I have a pair lying around... Might put them in if its easy.
if you have the rails then i see no problem?
when did you pick up the seats? is it the reps from luke?
Quote:
Originally Posted by black8thgen
5char.
Got the seats like a month or 2 ago. They're for the MX5 but considering putting them in just for the weekend. I have no rails, only the universal ones.. And na they're not from Luke, I got the carbon Kevlar ones
genuine or replicas?
if you have universal rails you'll need to do all the welding n shit sack that bro dont bother!
buddyclubs got rails fit on FD.. but not sure if they'll fit on on brides
Areissss I cant wait to see your car in person!! I'm over my rims... any suggestions anyone? Haven't been on this thing in a while, so hi everyone ! hahaha
OMGAD! For those of you who havent already, check out my feature with my car on All Stars :D <3
http://sydneyallstars.com/2013/01/jamielyn-salvador/
^Congratz on the feature, did they let you keep the custom singlet??Quote:
Originally Posted by j_me
for wheels,you could go for BBS LM's, XD9's or TE37 SL (those are the wheels im planning to go through) =P
Thanks johnny :) It was actually the allstars shirt I bought from the All Stars Spring Picnic meet, I just cut it into a singlet :P hahahah
Top stuff Jamie ! I reckon red is the best colour of the lot for the FD1 ! Id love a Red FD2 Type R but I guess I'll just have dream...........
http://img.amiami.jp/images/product/...SCL2-10676.jpgQuote:
Originally Posted by Stevil
:thumbsup:
Whose going allstars this saturday? Just finished detailing the car ^^
http://sphotos-h.ak.fbcdn.net/hphoto...33258261_n.jpg
Love that shine.
dont think i am. finishing up work at 5 in the morning=='Quote:
Originally Posted by Areis
if anyone is going to part out and has a black mugen kit, I'll take skirts and rear lip, possibly front lip too.
Cleaning up my car to sellll hopefully.
sick looking stanceQuote:
Originally Posted by Areis
hey guys just wondering...other than carmate is there any other place to get the fd type r body/conversion kit in sydney?
Ontherun?
Ontherun is only mugen lip kit.Quote:
Originally Posted by lolmclol
Bodykitskingdom, but they're in QLD I think do the type R :-S
yep just checked Bodykitskingdom they have it =)
does the type r bodykit require a custom exhaust tip? im pretty someone talked about it before in this forum but i cant seem to dig out that post...
^think you meant alter the exhaust of the way its hanging. gotta hang it lower or else it might burn the plastic
Buddyclub sells the Type-R body kits for the FD1Quote:
Originally Posted by starocean01
^ cool thanks ill shoot them an email too
jdmyard also, got mine for 950 posted to melb
box was huge,
https://pbs.twimg.com/media/BAyijPMCIAEDpqu.jpg:large
everything else was inside the other big box, just couldnt be stuffed getting them out at the time
https://pbs.twimg.com/media/BA9d37YCMAA77BX.jpg:large
Very nice!
repped mate.Quote:
Originally Posted by kikimushroom
oh wow thanks! will email them too lol
hows the fitting?
edit: the jdmyard website says $1199 for the kit O_O. when did u get yours kikimushroom?
nice man!
hey guys,sad thing today....might sell the car.
ill be parting out the recaro's and exhaust as i cbf taking the body kit off and other stuff on it.
will letyou guys know if the cars sold.
thanks for the rep! havent actually tried to fit it yet cause im so lazy. I got mine at the end of year sale.. S:
aww all the crazy fd's are gone now. What exhaust do you have jpark?
not crazy enough :L
J's racing 60RS Titanium Catback Exhaust FD2R (fits FD1) unsure about FD2
why the sell jonny?
^ hey ryan,
thinking of getting dc5R but still unsure atm. i wanna keep it but same time wanna sell it=(
still so much i wanna do to the car >.<
tbh.. do the sale and get the dc5r ahaha. so much more fun driving around a car with a bit more power under the belt, yet still achieving similar fuel consumption
^ get an s2k. dc5r overrated
Going to disagree with you guys, I still absolutely love the look of the integra, not saying the s2000 is good, just personal preference.
Inb4 fn2r vs ep3r
^ both are fugly lol
We mentioned a type r, meaning this will turn into a battle of type r'sQuote:
Originally Posted by xenonkuraz